Z53CMN21-9Az
2017-07-11 09:10:32 Origin： Remark：0 Click：
Material technical specifications of NF EN 10090 valve steel Z53CMN21-9Az datasheet,Z53CMN21-9Az Chemical compositions, Z53CMN21-9Az mechanical properties from Steelmaking,ESR melting, Hot blooming, UT, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or Machined. Technical specifications - NF EN 10090 - 1998. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATASHEET - NF X53CrMnNiN21-9 & Z53CMN21-9Az
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Valve Steel
Technical standards: NF EN 10090 - 1998
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.48 ~ 0.58
Si (％): ≤ 0.25
Mn (％): 8.00 ~ 10.0
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 20.0 ~ 22.0
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 20.0 ~ 22.0
Ni (％): 3.25 ~ 4.50
Mo (%): -
N (%): 0.35 ~ 0.50
MECHANICAL PROPERTIES
Annealed temperature /℃: -
Quenched temperature /℃: 1140 ~ 1180, water
Tempered temperature /℃: 760 ~ 815
Tensile strength,σb/≥ MPa: 950 ~ 1200
Yield strength, σ0.2/≥ MPa: 580
Elongation, δ ≥(％): 8.0
Yield strength, σ0.2/≥ MPa: 580
Elongation, δ ≥(％): 8.0
Reduction of area, (%): 10.0
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered thermal treatment
PRODUCT PROFILE
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered thermal treatment
PRODUCT PROFILE
Round bar (Diameter): 0.50 to 600mm
Square bar / Flat bar: T3.0 to 500mm X W3.0 ~ 1200mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T3.0 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 3mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.10 - 3mm X W5.0 - 600mm X L (or in coil form)
Square bar / Flat bar: T3.0 to 500mm X W3.0 ~ 1200mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T3.0 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 3mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.10 - 3mm X W5.0 - 600mm X L (or in coil form)
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, you can do as follows:
EMAIL our qualified production engineers, E-mail: lh.steel@hotmail.com
Reach to our sales department directly: sales@ccsteels.com
Hot search：Z53CMN21-9Az
Previous page：NF X33CrNiMnN23-8
Last page：DTD480
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1