AISI 405
2014-09-29 11:07:26 Origin： Remark：0 Click：
Specification AISI 405 Round bar, plate, Flat bar AISI 405 properties from Steelmaking, ESR melted, Hot forging, Hot rolling, Heat treatment
TECHNICAL DATA SHEET - AISI 405
MATERIAL CATEGORY: 13Cr - Al Ferrite type
PRODUCT DESCRIPTION
The alloy is usually produced by BEF + AOD / EAF + VD + LF followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
The alloy is usually produced by BEF + AOD / EAF + VD + LF followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
MATERIAL SPECIFICATIONS - ASTM A959 (2004), A276, A312, A632, A176, A580
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): ≤ 0.08
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 11.0 ~ 14.50
Nickel, Ni (％): ≤ 0.50
Molybdenum, Mo (％): -
Aluminum, Al (％): 0.10 ~ 0.30
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 11.0 ~ 14.50
Nickel, Ni (％): ≤ 0.50
Molybdenum, Mo (％): -
Aluminum, Al (％): 0.10 ~ 0.30
MECHANICAL PROPERTIES FINAL HEAT TREATMENT
Form: bar, sheet, plate
Condition: annealing
Tensile strength, Rm / MPa: 415
Yield strength, Rp0.2 / MPa: 170
Elongation, A5 (％): 20.0
Reduction of area, Z (％): -
Hardness | HBW: 179
Yield strength, Rp0.2 / MPa: 170
Elongation, A5 (％): 20.0
Reduction of area, Z (％): -
Hardness | HBW: 179
Hardness | HRB: 88
Cold bending property: N
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TYPICAL APPLICATIONS
Chemical equipments and parts.
Mechanical parts used in the condition of corrosion resistance.
Bolt and nut, Pressure vessel.
Chemical equipments and parts.
Mechanical parts used in the condition of corrosion resistance.
Bolt and nut, Pressure vessel.
PROFILE & DIMENSIONS
Round bar / Wire rod (diameter): 5.5 ~ 500mm
Square bar / Flat bar: 10 ~ 600mm
Plate / Sheet steel / Steel strip: 0.5mm to 1000mm
Width: 8mm to 1000mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts, and other different shapes based on OEM.
Round bar / Wire rod (diameter): 5.5 ~ 500mm
Square bar / Flat bar: 10 ~ 600mm
Plate / Sheet steel / Steel strip: 0.5mm to 1000mm
Width: 8mm to 1000mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts, and other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
Previous page：UNS S32803
Last page：S40500
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1