X6CrMoS19-2
2017-08-02 09:40:00 Origin： Remark：0 Click：
Material specifications X6CrMoS19-2 datasheet, X6CrMoS19-2 Chemical, X6CrMoS19-2 Properties from Steelmaking, ESR melting, Hot blooming, UT, Hot forging & rolling, Heat treat, Straightening, 100% Ultrasonic test, Cold working or Machined. Technical specifications - NF FD A35-570 -1996. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATASHEET - NF X6CrMoS19-2
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Stainless Steel Flat or plate
Technical standards: NF FD A35-570 - 96
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.08
Si (％): ≤ 1.00
Mn (％): ≤ 2.50
P (％)≤: 0.040
S (％)≤: 0.15 ~ 0.35
Cr (％): 17.5 ~ 19.5
P (％)≤: 0.040
S (％)≤: 0.15 ~ 0.35
Cr (％): 17.5 ~ 19.5
Mo (％): 1.50 ~ 2.50
Ni (%): ≤ 0.75
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength,σb/≥ MPa: 430
Yield strength, σ0.2/≥ MPa: 250
Elongation, δ ≥(％): 20.0
Yield strength, σ0.2/≥ MPa: 250
Elongation, δ ≥(％): 20.0
Reduction of area, (%): -
Annealed hardness, HB ≤: -
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / EF / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered thermal treatment
PRODUCT PROFILE & DIMENSIONS
The alloy is usually produced by AOD / EF / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered thermal treatment
PRODUCT PROFILE & DIMENSIONS
Round bar (Diameter): 5.5 to 400mm
Square bar / Flat bar: T3.0 to 500mm X W3.0 ~ 1000mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T3.0 - 200mm X W1000- 2500mm X L1000-12000mm
Square bar / Flat bar: T3.0 to 500mm X W3.0 ~ 1000mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T3.0 - 200mm X W1000- 2500mm X L1000-12000mm
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, you can EMAIL our qualified production engineers, Email: sales@ccsteels.com
If you meet further on any technical enquiry, you can EMAIL our qualified production engineers, Email: sales@ccsteels.com
Hot search：X6CrMoS19-2
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1