Super 13Cr
2017-08-07 15:49:22 Origin： Remark：0 Click：
Super 13Cr Specifications, Round bar, flat bar, forgings Super 13Cr ESR melting, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or machined.
TECHNICAL DATA SHEET - Grade Super 13Cr
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Stainless Steel
CHEMICAL COMPOSITION (mass weight %)
Carbon, C (％): ≤ 0.030
Silicon, Si (％): ≤ 0.50
Manganese, Mn (％): ≤ 0.50
Phosphorus, P (％)≤: 0.020
Sulfur, S (％)≤: 0.005
Chromium, Cr (％): 11.5～13.5
Nickel, Ni (％): 4.50 ~ 6.50
Molybdenum, Mo (％): 1.80 ~ 3.00
Other(％): Ti + Nb ≤ 0.50, Vanadium ≤ 0.50
Silicon, Si (％): ≤ 0.50
Manganese, Mn (％): ≤ 0.50
Phosphorus, P (％)≤: 0.020
Sulfur, S (％)≤: 0.005
Chromium, Cr (％): 11.5～13.5
Nickel, Ni (％): 4.50 ~ 6.50
Molybdenum, Mo (％): 1.80 ~ 3.00
Other(％): Ti + Nb ≤ 0.50, Vanadium ≤ 0.50
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Heat treatment condition: hardened & tempered
Tensile strength, σb/MPa: 800 Min
Yield strength, σ0.2≥/MPa: 759 Min
Elongation, δ5≥(％): 15.0
Yield strength, σ0.2≥/MPa: 759 Min
Elongation, δ5≥(％): 15.0
Reductiion of area, ψ≥(％): -
Impact strength, Akv≥/J: -
Impact strength, Akv≥/J: -
APPLICATION
Super alloy 13Cr is a low carbon martensitic steel with high corrosion resistance.
This material is typically used in fully-setting equipment and environments contains Chlorides and CO2.
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered thermal treatment
PRODUCT PROFILE
The alloy is usually produced by AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered thermal treatment
PRODUCT PROFILE
Round bar (Diameter): 5.5 to 600mm
Square bar / Flat bar: T3.0 to 500mm X W3.0 ~ 1200mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W100 - 1000mm X L1000 - 5000mm
Square bar / Flat bar: T3.0 to 500mm X W3.0 ~ 1200mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W100 - 1000mm X L1000 - 5000mm
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, you can reach our qualified production engineers via Email: sales@ccsteels.com
If you meet further on any technical enquiry, you can reach our qualified production engineers via Email: sales@ccsteels.com
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1