X45CrS13
2017-08-22 10:28:18 Origin： Remark：0 Click：
Material technical specification NF FD A35-570-1996 Stainless steel X45CrS13 datasheet,X45CrS13 Chemical compositions, X45CrS13 mechanical properties from Steelmaking, ESR melting,X45CrS13 Hot blooming, UT, Hot forging, Hot rolling, Grade X45CrS13 Heat treatment, Straightening, 100% Ultrasonic test, Cold working or Machined. Technical specifications - NF FD A35-570 -1996. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATASHEET - NF X45CrS13
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Stainless Steel Flat or plate
Technical standards: NF FD A35-570 - 96
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.40 ~ 0.48
Si (％): ≤ 1.00
Mn (％): ≤ 2.00
P (％)≤: 0.040
S (％)≤: 0.16 ~ 0.26
Cr (％): 12.0 ~ 14.0
P (％)≤: 0.040
S (％)≤: 0.16 ~ 0.26
Cr (％): 12.0 ~ 14.0
Mo (％): -
Ni (%): -
MECHANICAL PROPERTIES
Tensile strength,σb/≥ MPa: 735
Yield strength, σ0.2/≥ MPa: 540
Elongation, δ ≥(％): 12.0
Yield strength, σ0.2/≥ MPa: 540
Elongation, δ ≥(％): 12.0
Reduction of area, (%): 40.0
Annealed hardness, HB ≤: 217
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / EF / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered thermal treatment
PRODUCT PROFILE
The alloy is usually produced by AOD / EF / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered thermal treatment
PRODUCT PROFILE
Round bar (Diameter): 0.50 to 600mm
Square bar / Flat bar: T3.0 to 500mm X W3.0 ~ 1200mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T3.0 - 200mm X W1000- 2500mm X L1000-12000mm
Square bar / Flat bar: T3.0 to 500mm X W3.0 ~ 1200mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T3.0 - 200mm X W1000- 2500mm X L1000-12000mm
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, you can do as follows:
EMAIL our qualified production engineers, E-mail: lh.steel@hotmail.com
Reach to our sales department directly: sales@ccsteels.com
Hot search：X45CrS13
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1