F6NM
2017-08-29 11:13:15 Origin： Remark：0 Click：
ASTM A182 Specifications F6NM Round bar, Flat bar, Plate, F6NM Forgings ESR melted, Blooming, Forging, Hot rolling, Heat treatment
TECHNICAL DATA SHEET - ASTM A182 type F6NM
TECHNICAL SPECIFICATION - ASTM A182
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): ≤ 0.050
Carbon, C (％): ≤ 0.050
Silicon, Si (％): ≤ 0.60
Manganese, Mn (％): 0.50 ~ 1.00
Phosphorus, P (％) ≤: 0.030
Sulfur, S (％) ≤: 0.025
Chromium, Cr (％): 11.5 ~ 14.0
Nickel, Ni (％): 3.50 ~ 5.50
Molybdenum, Mo (％): 0.50 ~ 1.00
Manganese, Mn (％): 0.50 ~ 1.00
Phosphorus, P (％) ≤: 0.030
Sulfur, S (％) ≤: 0.025
Chromium, Cr (％): 11.5 ~ 14.0
Nickel, Ni (％): 3.50 ~ 5.50
Molybdenum, Mo (％): 0.50 ~ 1.00
Ferrum, Fe (%): balance
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: + annealed
Tensile strength, Rm ≥ MPa: 655
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: + annealed
Tensile strength, Rm ≥ MPa: 655
Yield strength, Rp0.2 ≥ MPa: 517
Elonghation, A5 ≥ (％): 17.0
Reduction of area, Z (％) ≥: 35
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - Quenched and tempered + SRA.
FORMS AND DIMENSIONS
Round bar (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 500mm
The alloy is usually produced by AOD / VOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - Quenched and tempered + SRA.
FORMS AND DIMENSIONS
Round bar (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 500mm
Steel wire: Diam.0.10 ~ 4.0mm, in coil form
Random length or fixed length baed on customers' special requirement.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
Hot search：F6NM
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1