AMS 6515 / Maraging 350
2017-10-16 10:39:35 Origin: Remark:0 Click:
Technical specification of AISI 18Ni Maraging 350 Stainless steel - AISI Grade 18Ni Maraging 350 , from steelmaking, forging, rolling,heat treatment,cold working.We also possess advanced precision machining equipments for further processing.
MATERIAL TECHNICAL DATASHEET - AMS 6515 & Maraging 350
MATERIAL CATEGORY: 18% Nickel and 12.0% Cobalt strengthened steel
PRODUCT DESCRIPTION
The alloy is usually produced by VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
The alloy is usually produced by VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
Maraging 350 steels are iron-nickel alloys with absence of carbon and have metals such as molybdenum, cobalt, titanium and aluminum.
The alloys have ultra-high strength, superior toughness characteristics and weldability. Typically, these alloys are used in aerospace applications, machinery and tooling and ordnance components and fasteners.
The density of maraging 350 steel is 8.0 g/cm3.
MATERIAL SPECIFICATIONS - AMS 6515, ASTM A538
CHEMICAL COMPOSITION (mass weight %)
C (%): ≤ 0.030
Si (%): ≤ 0.10
Mn (%): ≤ 0.10
P (%)≤: 0.010
S (%)≤: 0.010
Cr (%): ≤ 0.50
Ni (%): 17.0 ~ 19.0
Mo (%): 4.60 ~ 5.20
Other (%): Al 0.05 ~ 0.15, Co 10.5 ~ 13.5.Ti 1.10 ~ 1.55, Cu ≤0.50
Si (%): ≤ 0.10
Mn (%): ≤ 0.10
P (%)≤: 0.010
S (%)≤: 0.010
Cr (%): ≤ 0.50
Ni (%): 17.0 ~ 19.0
Mo (%): 4.60 ~ 5.20
Other (%): Al 0.05 ~ 0.15, Co 10.5 ~ 13.5.Ti 1.10 ~ 1.55, Cu ≤0.50
MECHANICAL PROPERTIES ( FINAL HEAT TREATMENT OR Q/T) UNDER ROOM TEMP.
Condition: heat treatment
Tensile Strength, σb/MPa: 342KSI
Yield strength, σ0.2≥/MPa: 330KSI
Elongation, δ5≥(%): 5.0
Yield strength, σ0.2≥/MPa: 330KSI
Elongation, δ5≥(%): 5.0
Reduction of area, ψ≥(%): -
Hardness≥: 52HRC
Hardness≥: 52HRC
TYPICAL APPLICATIONS
Driveshafts, Gears, Fasteners
Landing and takeoff gear, Missile and ejector systems, Torsion springs.
PRODUCT PROFILE
Round bar / Wire rod (Diameter): 0.50mm to 800mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Pipes / Tubings: OD ~ 219 mm, with wall thickness ranging from 0.50 to 35 mm.
Round bar / Wire rod (Diameter): 0.50mm to 800mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Pipes / Tubings: OD ~ 219 mm, with wall thickness ranging from 0.50 to 35 mm.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
Previous page:Z6CN19-09Az
Last page:S11100
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1