Z3NCUD28-20
2018-04-24 11:40:22 Origin： Remark：0 Click：
Material technical specifications of NF A35-574 -1990 hot rolled stainless steel bars & wire rod,NF Z3NCUD28-20 datasheet, NF Z3NCUD28-20 Chemical compositions, Z3NCUD28-20 mechanical properties from Steelmaking, ESR melting, Hot blooming, UT, NF Z3NCUD28-20 Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or Machined. Technical specifications - NF A35-574 - 1990. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATA SHEET - Grade Z3NCUD28-20
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Hot rolled stainless steel round bar and wire rod
Technical standards: NF A35-574 - 1990
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.030
Si (％): ≤ 0.75
MATERIAL CATEGORY: Hot rolled stainless steel round bar and wire rod
Technical standards: NF A35-574 - 1990
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.030
Si (％): ≤ 0.75
Mn (％): ≤ 2.00
P (％)≤: 0.035
S (％)≤: 0.010
Cr (％): 19.0 ~ 21.0
S (％)≤: 0.010
Cr (％): 19.0 ~ 21.0
Ni (%): 26.0 ~ 29.0
Mo (％): 2.00 ~ 3.00
Cu (%): 2.00 ~ 4.00
MECHANICAL PROPERTIES
Condition: solution annealed
Tensile strength, TS, σb/≥ MPa: 630
Yield strength, YS, σ0.2/≥ MPa: 380
Elongation, EL, δ ≥(％): 20.0
Yield strength, YS, σ0.2/≥ MPa: 380
Elongation, EL, δ ≥(％): 20.0
Reduction of area, RA, (%): -
Annealed hardness, HB ≤: 255
PRODUCT DESCRIPTION
The alloy is usually produced by IFF + AOD + VD, AOD + EF / EAF + VD, followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered thermal treatment or based on the buyer's special requirements.
The alloy is usually produced by IFF + AOD + VD, AOD + EF / EAF + VD, followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered thermal treatment or based on the buyer's special requirements.
ADVANTAGED STOCK
AISI 690 /Refractaloy 26, ASTM A565 Grade 616 /422SS /S42200, Grade 615 /S41800, XM-32 /S64152, PH13-8 /XM-13 /S13800
FV520B /1.4594, PH15-7Mo /632 (S15700), 15-5PH /XM-12 (S15500), 17-4PH /630 /1.4542, 17-7PH /631 (S17700),
851, 961, WB36, D6-AC, D6A. A-286 /ASTM 660, AM-350 /633 (S35000), AM-355 /634 (S35500), Custom 450 /XM-25 (S45000)
1.4980, X22CrMoV12-1 /1.4923, 1.4935, 1.4938, 1.4913
Forms: Bars, Forge piece, Ring, Strip
Non-magnetic alloy
X40MnCrN19/1.3813, X8CrMnN18-18/1.3816, X40MnCr18/1.3817, N1310, X55CrMnN18-4, X50MnCrV20-14, X5MnCrNiN18-13
DIN 1.3964, DIN 1.3974, 23-8N /Nitronic 20,
Forms: Bars, Forge piece, Ring
PRODUCT PROFILE AND AVAILABLE FORMS
Round bar (Diameter): 5.50mm to 650mm
Square bar / Flat bar: T3 to 500mm X W3 ~ 1200mm
Round bar (Diameter): 5.50mm to 650mm
Square bar / Flat bar: T3 to 500mm X W3 ~ 1200mm
Wire rod (Diameter): 0.50mm to 16mm
Strip: T0.20~3.0 X W8.0~650mm
Length: Fixed length or random length or based on the customer's special requirement.
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, please EMAIL our qualified production engineers.
If you meet further on any technical enquiry, please EMAIL our qualified production engineers.
- E-mail: lh.steel@hotmail.com
Hot search：Z3NCUD28-20
Previous page：Z3CNU23-04Az
Last page：1.4534 / X3CrNiMoAl13-8-2
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1