AMS 5894
2018-06-11 15:28:31 Origin： Remark：0 Click：
specifications AMS 5894 datasheet, AMS 5894 Chemical, AMS 5894 properties from Steelmaking, ESR & VAR technique,Blooming, Hot forging, Hot rolling, Heat treatment,
TECHNICAL DATA SHEET - AMS 5894
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Cr - Co - W base on alloy steel
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.90 ~ 1.40
Silicon, Si (％): 0.20 ~ 2.00
Manganese, Mn (％): 0.50 ~ 2.00
Phosphorus, P (％)≤: 0.025
Carbon, C (％): 0.90 ~ 1.40
Silicon, Si (％): 0.20 ~ 2.00
Manganese, Mn (％): 0.50 ~ 2.00
Phosphorus, P (％)≤: 0.025
Sulfur, S (％)≤: 0.015
Chromium, Cr (％): 28.0 ~ 32.0
Chromium, Cr (％): 28.0 ~ 32.0
Nickel, Ni (％): ≤ 3.00
Molybdenum, Mo (％): ≤ 1.50
Cobalt, Co (%): Balance
Cobalt, Co (%): Balance
Tungsten, W (%): 3.50 ~ 5.50
Aluminium, Al (%): -
Aluminium, Al (%): -
Copper, Cu (%): -
Titannium, Ti (%): -
Titannium, Ti (%): -
Ferrum, Fe (% ): ≤ 3.00
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, σb/≥ MPa: 900
Yield strength, σ0.2/MPa: 485
Elongation, δ ≥(％): 5.0
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: 33 ~ 43
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: 33 ~ 43
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution + Aged or Double aged.
SHAPES & DIMENSIONS
Round bar & Disc (diameter): 5.50 ~ 650mm
Square bar / Flat bar: 3 ~ 350mm
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution + Aged or Double aged.
SHAPES & DIMENSIONS
Round bar & Disc (diameter): 5.50 ~ 650mm
Square bar / Flat bar: 3 ~ 350mm
Wire rod (Diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Other sizes can be supplied to meet specific requirements.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our qualified production engineers. - Email: sales@ccsteels.com
If you meet further on any technical enquiry, pleased to EMAIL our qualified production engineers. - Email: sales@ccsteels.com
Previous page：Haynes 6B / R30016
Last page：BS 620
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1