N10242
2018-07-25 14:53:03 Origin： Remark：0 Click：
Technical specifications of alloys N10242 datasheet, N10242 Chemical composition,Grade N10242 mechanical properties from Steelmaking, ESR & VAR technique, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATA SHEET - Grade N10242
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Mo - Cr - Ni base alloy
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.03
C (％): ≤ 0.03
Si (％): ≤ 0.80
Mn (％): ≤ 0.80
P (％)≤: 0.025
Mn (％): ≤ 0.80
P (％)≤: 0.025
S (％)≤: 0.015
Cr (％): 7.00 ~ 9.00
Cr (％): 7.00 ~ 9.00
Ni (％): Remainder
Mo (％): 24.0 ~ 26.0
Co (%): ≤ 2.50
Co (%): ≤ 2.50
W (%): -
Al (%): ≤ 0.50
Al (%): ≤ 0.50
Cu (%): ≤ 0.50
Ti (%): -
Fe (% ): ≤ 2.00
B (%): ≤ 0.006
TYPICAL MECHANICAL PROPERTIES
Tensile strength, σb/≥ MPa: 1290
Yield strength, σ0.2/MPa: 845
Elongation, δ ≥(％): 36.0
Reduction of area, ф ≥ (％): 45.0
Hardness via heat treatment /HBW: HRC 30 max.
Reduction of area, ф ≥ (％): 45.0
Hardness via heat treatment /HBW: HRC 30 max.
TYPICAL APPLICATIONS
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution + Aged or Double aged.
FORMS AND SHAPES
Round bar (Diameter): 5.50 ~ 450mm
Square bar / Flat bar: 3 ~ 350mm
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution + Aged or Double aged.
FORMS AND SHAPES
Round bar (Diameter): 5.50 ~ 450mm
Square bar / Flat bar: 3 ~ 350mm
Wire rod (Diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Other sizes can be supplied to meet specific requirements.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our qualified production engineers.E-mail: lh.steel@hotmail.com
If you meet further on any technical enquiry, pleased to EMAIL our qualified production engineers.E-mail: lh.steel@hotmail.com
Hot search：N10242
Previous page：Haynes 242
Last page：BS 828
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1