S41603
2014-10-08 14:31:56 Origin： Remark：0 Click：
ASTM A276 Material Specification Martensitic Steel S41603 Round bar, flat bar, plate, forgings Stock Available S41603 Heat treatment
MATERIAL DATA SHEET - UNS S41603
MATERIAL CATEGORY: 13Cr Martensitic type
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD / EAF. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
The alloy is usually produced by AOD / VOD / EAF. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
MATERIAL SPECIFICATIONS - ASTM A959 (2004), A276, A312, A632, A176, A580
CHEMICAL COMPOSITION (mass weight - %) - UNS S41603
Carbon, C (％): ≤ 0.08
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 1.25
Phosphorus, P (％)≤: 0.06
Sulfur, S (％): ≥ 0.15
Chromium, Cr (％): 12.0 ~ 14.0
Nickel, Ni (％): -
Molybdenum, Mo (％): -
Nitrogen, N (&): -
Ferrum, Fe (％): -
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 1.25
Phosphorus, P (％)≤: 0.06
Sulfur, S (％): ≥ 0.15
Chromium, Cr (％): 12.0 ~ 14.0
Nickel, Ni (％): -
Molybdenum, Mo (％): -
Nitrogen, N (&): -
Ferrum, Fe (％): -
Form: heavy plate, sheet, strip
Tensile strength, σb / MPa: 515
Yield strength, σ0.2 / MPa: 205
Elongation, δ5 (％): -
Reduction of area, Z (％): -
Elongation, δ5 (％): -
Reduction of area, Z (％): -
Hardness (HBW): -
Hardness | HRB: -
Cold bending property: -
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TYPICAL APPLICATIONS
Chemical equipment and parts.
Mechanical parts used in the condition of corrosion resistance.
Bolt and nuts and Pressure vessel.
Chemical equipment and parts.
Mechanical parts used in the condition of corrosion resistance.
Bolt and nuts and Pressure vessel.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. Email: sales@ccsteels.com.
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. Email: sales@ccsteels.com.
PRODUCT PROFILE & DIMENSIONS
Round bar / rod / disc (diameter): 5.5 ~ 800mm
Square bar / Flat bar: 6 to 600mm
Plate / Sheet steel / Steel strip: 0.1mm to 1200mm
Width: 8mm to 200mm
Length: random length or based on the customer's special requirement.
Round bar / rod / disc (diameter): 5.5 ~ 800mm
Square bar / Flat bar: 6 to 600mm
Plate / Sheet steel / Steel strip: 0.1mm to 1200mm
Width: 8mm to 200mm
Length: random length or based on the customer's special requirement.
Hot search：S41603
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1