2.4634 / Alloy 105
2018-08-03 10:34:15 Origin： Remark：0 Click：
Technical specifications Ni-Co-Cr-Al Base Steel 2.4634 & Alloy 105 Mmechanical properties, ESR & VAR technique, Hot forging, Hot rolling, Heat treatment
TECHNICAL DATA SHEET - 2.4634 & Alloy 105
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Ni-Co-Cr--Al alloy
CHEMICAL COMPOSITIONS (mass weight - %)
Carbon, C (％): ≤ 0.20
Carbon, C (％): ≤ 0.20
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％) ≤: 0.020
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％) ≤: 0.020
Sulfur, S (％) ≤: 0.010
Chromium, Cr (％): 14.0 ~ 15.7
Chromium, Cr (％): 14.0 ~ 15.7
Nickel, Ni (％): 51.0 min.
Molybdenum, Mo (％): 4.50 ~ 5.50
Cobalt, Co (%): 18.0 ~ 22.0
Cobalt, Co (%): 18.0 ~ 22.0
Tungsten, W (%): -
Aluminum, Al (%): 4.50 ~ 4.90
Aluminum, Al (%): 4.50 ~ 4.90
Copper, Cu (%): ≤ 0.50
Titanium, Ti (%): 0.90 ~ 1.50
Boron, B (% ): 0.003 ~ 0.010
TYPICAL MECHANICAL PROPERTIES
Tensile strength, Rm ≥ MPa: 1150
Yield strength, Rp0.2 / MPa: 770
Elongation, A5 ≥ (％): 25.0
Reduction of area, Z ≥ (％): -
Hardness via heat treatment /HBW: -
Reduction of area, Z ≥ (％): -
Hardness via heat treatment /HBW: -
TYPICAL APPLICATIONS
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution + Aged or Double aged.
FORMS AND DIMENSIONS
Round bar / rod / disc (diameter): 5.50 ~ 850mm
Square bar / Flat bar: 10 ~ 350mm
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution + Aged or Double aged.
FORMS AND DIMENSIONS
Round bar / rod / disc (diameter): 5.50 ~ 850mm
Square bar / Flat bar: 10 ~ 350mm
Wire rod (Diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Other sizes can be supplied to meet specific requirements.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our qualified production engineers.
If you meet further on any technical enquiry, pleased to EMAIL our qualified production engineers.
Previous page：NiMoNic 105
Last page：BS 271-560
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1