Z12CND16-05-03
2018-08-21 09:27:57 Origin： Remark：0 Click：
NF A35-574 -1990 type Z12CND16-05-03 Round bar, flat bar, Forgings Z12CND16-5-3 ESR melting, Hot blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test.
TECHNICAL DATA SHEET - Grade Z12CND16-05-03
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Hot rolled stainless steel round bar and wire rod
Technical standards: NF A35-574 - 1990
CHEMICAL COMPOSITION (mass weight %)
Carbon, C (％): 0.08 ~ 0.15
Silicon, Si (％): ≤ 0.50
MATERIAL CATEGORY: Hot rolled stainless steel round bar and wire rod
Technical standards: NF A35-574 - 1990
CHEMICAL COMPOSITION (mass weight %)
Carbon, C (％): 0.08 ~ 0.15
Silicon, Si (％): ≤ 0.50
Manganese, Mn (％): 0.70 ~ 1.30
Phosphorus, P (％)≤: 0.035
Sulfur, S (％)≤: 0.025
Chromium, Cr (％): 15.0 ~ 16.0
Sulfur, S (％)≤: 0.025
Chromium, Cr (％): 15.0 ~ 16.0
Nickel, Ni (%): 4.00 ~ 5.00
Molybdenum, Mo (％): 2.50 ~ 3.25
Nitrogen, N (%): 0.05 ~ 0.15
Copper, Cu (%): ≤ 0.20
TYPICAL MECHANICAL PROPERTIES
Tensile strength, TS, σb/≥ MPa: 1150
Yield strength, YS, σ0.2/≥ MPa: 1000
Elongation, EL, δ ≥(％): 12.0
Yield strength, YS, σ0.2/≥ MPa: 1000
Elongation, EL, δ ≥(％): 12.0
Reduction of area, RA, (%): -
Annealed hardness, HB ≤: 388
PRODUCT DESCRIPTION
The alloy is usually produced by IFF + AOD + VD, AOD + EF / EAF + VD, followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered thermal treatment or based on the buyer's special requirements.
The alloy is usually produced by IFF + AOD + VD, AOD + EF / EAF + VD, followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered thermal treatment or based on the buyer's special requirements.
PRODUCT PROFILE AND AVAILABLE FORMS
Round bar (Diameter): 5.50mm to 650mm
Square bar / Flat bar: T3 to 500mm X W3 ~ 1200mm
Round bar (Diameter): 5.50mm to 650mm
Square bar / Flat bar: T3 to 500mm X W3 ~ 1200mm
Strip: T0.20~3.0 X W8.0~650mm
Length: Fixed length or random length or based on the customer's special requirement.
Other sizes can be supplied to meet specific requirements.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, please EMAIL our qualified production engineers. - E-mail: sales@ccsteels.com.
If you meet further on any technical enquiry, please EMAIL our qualified production engineers. - E-mail: sales@ccsteels.com.
Hot search：Z12CND16-05-03
Previous page：BS 625-590
Last page：HR3C / S31042
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1