Z15CN16-02
2025-01-21 16:52:00 Origin： Remark：0 Click：
NF A35-574 Martensitic Steel Z15CN16-02 Round bar, Flat bar, Stock available Z15CN16-02 ESR melt, Hot forging, Hot rolling, Heat treatment
TECHNICAL DATA SHEET - Z15CN16-02
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Hot rolled stainless steel round bar and wire rod
Technical standards: NF A35-574 - 1990
CHEMICAL COMPOSITIONS (mass weight - %)
Carbon, C (％): 0.15 ~ 0.20
Silicon, Si (％): ≤ 1.00
MATERIAL CATEGORY: Hot rolled stainless steel round bar and wire rod
Technical standards: NF A35-574 - 1990
CHEMICAL COMPOSITIONS (mass weight - %)
Carbon, C (％): 0.15 ~ 0.20
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 1.50
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.025
Chromium, Cr (％): 15.5 ~ 17.0
Sulfur, S (％) ≤: 0.025
Chromium, Cr (％): 15.5 ~ 17.0
Molybdenum, Mo (％): -
Nickel, Ni (%): 1.50 ~ 2.50
TYPICAL MECHANICAL PROPERTIES
Tensile strength, Rm ≥ MPa: 795
Yield strength, Rp0.2 ≥ MPa: 620
Elongation, A5 ≥ (％): 15.0
Yield strength, Rp0.2 ≥ MPa: 620
Elongation, A5 ≥ (％): 15.0
Reduction of area, Z (%): -
Annealed hardness, HB ≤: 295
PRODUCT DESCRIPTION
The alloy is usually produced by AOD or BEF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black in the annealed condition.
Final heat treatment - Quenched and tempered thermal treatment or based on the buyer's special requirements.
The alloy is usually produced by AOD or BEF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black in the annealed condition.
Final heat treatment - Quenched and tempered thermal treatment or based on the buyer's special requirements.
PRODUCT PROFILE AND DIMENSIONS
Rod / round bar / disc (diameter): 5.5mm to 650mm
Square bar / flat bar: T6 to 500mm X W10 ~ 1000mm
Rod / round bar / disc (diameter): 5.5mm to 650mm
Square bar / flat bar: T6 to 500mm X W10 ~ 1000mm
Strip: T0.20~3.0 X W8.0~650mm
Length: Fixed length or random length or based on the customer's special requirement.
Other sizes can be supplied to meet specific requirements.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, please EMAIL (sales@ccsteels.com.) our qualified production engineers.
If you meet further on any technical enquiry, please EMAIL (sales@ccsteels.com.) our qualified production engineers.
Hot search：Z15CN16-02
Previous page：BS 629-590
Last page：BS 509-650
Total list
Monthly rank
- 56ASTM A565 type 616HT
- 27X35CrMo17
- 26Z15CN17-03
- 20P550
- 19X12CrMoWVNbN10-1-1
- 16ASTM A638 Gr.660
- 16S42400
- 15SAE 51420
- 14S165M / S165
- 13X120Mn13