AISI 429
2014-10-08 14:55:44 Origin： Remark：0 Click：
Specifications AISI 429 Datasheet, Stocklist AISI 429 Chemical, Inventory AISI 429 Properties from Steelmaking, Blooming, Hot forging, Hot rolling, Heat treat, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
TECHNICAL SPECIFICATION DATASHEET - AISI 429
SPECIAL MELTING PROCESS - EAF + AOD / + ESR
MATERIAL CATEGORY - Stainless steel round bar, wire rod, and semi-finished products
STEEL TYPE - Ferrite series
HS Code For Customs - 72221100 / 72221900 / 72222000
MATERIAL SPECIFICATIONS - ASTM A276 / A269
CHEMICAL COMPOSITION ( Mass Weight % )
C (％): ≤ 0.12
Si (％): ≤ 1.00
Mn (％): ≤1.00
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 14.0 ~ 16.0
Ni (％): -
Mo (％): -
Si (％): ≤ 1.00
Mn (％): ≤1.00
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 14.0 ~ 16.0
Ni (％): -
Mo (％): -
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition of thermal treatment: AT (Solution treatment)
Hardness ≤HBS: 219
Yield strength σ0.2≥/MPa: 205
Tensile strength σb/MPa: 450
Elongation δ ≥(％): 22.0
Elongation δ (transversal )≥(％): -
Impact absorbing power Akv≥/J : -
Yield strength σ0.2≥/MPa: 205
Tensile strength σb/MPa: 450
Elongation δ ≥(％): 22.0
Elongation δ (transversal )≥(％): -
Impact absorbing power Akv≥/J : -
PRODUCT DESCRIPTION
The alloy is usually produced by EAF AOD / VOD followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment + aged
The alloy is usually produced by EAF AOD / VOD followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment + aged
PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy / middle plate via hot rolled: T60 - 400mm X W70 - 1500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1