Incoloy 908 / N09908
2018-11-19 08:13:01 Origin： Remark：0 Click：
Technical specification of American Incoloy series alloys Incoloy 908 & N09908 datasheet, N09908 Chemical composition, Incoloy 908 & N09908 mechanical properties from Steelmaking, ESR & VAR technique, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATA SHEET - Incoloy 908 & N09908
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.030
C (％): ≤ 0.030
Si (％): ≤ 0.50
Mn (％): ≤ 1.00
Mn (％): ≤ 1.00
P (％)≤: 0.015
S (％)≤: 0.005
Cr (％): 3.75 ~ 4.50
Cr (％): 3.75 ~ 4.50
Ni (％): 47.0 ~ 51.0
Mo (％): -
Co (%): ≤ 0.50
Co (%): ≤ 0.50
W (%): -
Al (%): 0.75 ~ 1.25
Al (%): 0.75 ~ 1.25
Cu (%): ≤ 0.50
Ti (%): 1.20 ~ 1.80
Fe (% ): Balance
Nb (%): 2.70 ~ 3.30
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, σb/≥ MPa: 1172
Yield strength, σ0.2/MPa: 827
Elongation, δ ≥(％): 12.0
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: HRC 36 ~ 40
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: HRC 36 ~ 40
FORMS AND SHAPES
Round bar (Diameter): 5.50 ~ 550 mim
Square bar / Flat bar: 3 ~ 350mm
Round bar (Diameter): 5.50 ~ 550 mim
Square bar / Flat bar: 3 ~ 350mm
Wire rod (Diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Other sizes can be supplied to meet specific requirements.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our qualified production engineers.E-mail: lh.steel@hotmail.com
Hot search：Incoloy 908 / N09908
Previous page：Incoloy 908
Last page：Z5CN18-11FF
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1