1.4862 / X8NiCrSi38-18 Stockist, 1.4862 / X8NiCrSi38-18 Equivalent Steel

1.4862 / X8NiCrSi38-18
2018-11-27 07:55:02   Origin:   Remark:0 Click:

Technical specifications of alloy EN 1.4862 & X8NiCrSi38-18 datasheet,EN 1.4862 & X8NiCrSi38-18 Chemical compositions, 1.4862 & X8NiCrSi38-18 mechanical properties from Steelmaking, ESR & VAR technique, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATA SHEET - EN 1.4862 & X8NiCrSi38-18
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS BV
MATERIAL CATEGORY: Ni-Cr-Nb-Fe alloy steel
CHEMICAL COMPOSITION (WEIGHT %)
C (%):      ≤ 0.10
Si (%):      1.90 ~ 2.60
Mn (%):    0.80 ~ 1.50
P (%)≤:    0.025
S (%)≤:    0.015
Cr (%):     17.0 ~ 19.0
Ni (%):     34.0 ~ 41.0
Mo (%):    -
Co (%):     -
W (%):     -
Al (%):     -
Cu (%):    ≤ 0.50
Ti (%):      ≤ 0.20
Fe (% ):    39.5 ~ 45.0
TYPICAL MECHANICAL PROPERTIES
Tensile strength, σb/≥ MPa: 550 ~ 750
Yield strength, σ0.2/MPa: 215
Elongation, δ ≥(%): 30.0
Reduction of area, ф ≥ (%): -
Hardness via heat treatment /HBW: 223
FORMS AND SHAPES
Round bar (Diameter): 4.00 ~ 550mm
Square bar / Flat bar: 3 ~ 350mm
Wire rod (Diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Other sizes can be supplied to meet specific requirements.

TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our qualified production engineers.E-mail: lh.steel@hotmail.com
 

Hot search:1.4862 / X8NiCrSi38-18

Previous page:Incoloy DS / N08330
Last page:2S119

Share to: