Home > Stainless steel > Text

N07263
2019-01-26 09:43:23 Origin： Remark：0 Click：

Material technical specifications of alloy steel forgings for N07263 data sheet, N07263 Chemical compositions, N07263 mechanical properties from Steelmaking, ESR melting, Hot blooming, UT, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or Machined. Technical specifications - ASTM A768-05. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.

TECHNICAL DATA SHEET - UNS N07263

OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV

MATERIAL CATEGORY: Ni-Co-Cr-Mo alloy

CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.04 ~ 0.08

Si (％): ≤ 0.40
Mn (％): ≤ 0.65

P (％)≤: 0.020

S (％)≤: 0.007
Cr (％): 19.0 ~ 21.0

Ni (％): Balance

Mo (％): 5.60~ 6.10
Co (%): 19.0 ~ 21.0

W (%): -
Al (%): 0.30 ~ 0.60

Cu (%): ≤ 0.20

Ti (%): 1.90 ~ 2.40

B (% ): ≤ 0.005

TYPICAL MECHANICAL PROPERTIES UNDER ROOM TEMP.

Tensile strength, σb/≥ MPa: 970

Yield strength, σ0.2/MPa: 570

Elongation, δ ≥(％): 30.0
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: -
FORMS AND SHAPES
Round bar (Diameter): 5.50 ~ 450mm
Square bar / Flat bar: 3 ~ 350mm

Wire rod (Diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.

Other sizes can be supplied to meet specific requirements.

TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our qualified production engineers.E-mail: lh.steel@hotmail.com

Hot search：

Previous page：2.4650 / Alloy C-263
Last page：AMS 6419

Share to：

N07263
2019-01-26 09:43:23 Origin： Remark：0 Click：

Total list

Monthly rank

N07263 2019-01-26 09:43:23 Origin： Remark：0 Click：

Total list

Monthly rank

N07263
2019-01-26 09:43:23 Origin： Remark：0 Click：