40CrMoV4-6
2019-03-28 15:38:19 Origin： Remark：0 Click：
Material technical specifications of High temperature alloy steels for internal combustion engine 40CrMoV4-6 datasheet, 40CrMoV4-6 Chemical compositions, 40CrMoV4-6 mechanical properties from Steelmaking, ESR melting, Hot blooming, UT, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or Machined. Technical specifications - ISO / TR 4956 - 1984, 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATA SHEET - 40CrMoV4-6
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: High temperature alloy steel for internal combustion engine
MATERIAL SPECIFICATIONS: ISO / TR 4956 - 1984
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.35 ~ 0.44
Si (％): 0.15 ~ 0.35
Mn (％): 0.45 ~ 0.70
P (％)≤: 0.030
S (％)≤: 0.030
Cr (％): 0.90 ~ 1.20
Ni (％): -
Mo (％): 0.55 ~ 0.75
Si (％): 0.15 ~ 0.35
Mn (％): 0.45 ~ 0.70
P (％)≤: 0.030
S (％)≤: 0.030
Cr (％): 0.90 ~ 1.20
Ni (％): -
Mo (％): 0.55 ~ 0.75
V (%): 0.25 ~ 0.35
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition of heat treatment: Quenched and tempered
Tensile strength, σb ≥/MPa: 850 ~ 1000
Yield strength, σ0.2 ≥/MPa: 700
Yield strength, σ0.2 ≥/MPa: 700
Elontation, δ ≥(％): 14.0
Reduction of area, ф ≥(％): -
Hardness | HBW: 297 max.
Reduction of area, ф ≥(％): -
Hardness | HBW: 297 max.
PRODUCT DESCRIPTION
The alloy is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
The alloy is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
FORMS AND SHAPES
Round bar (Diameter): 5.50 ~ 650mm
Square bar / Flat bar: 3 ~ 650mm
Round bar (Diameter): 5.50 ~ 650mm
Square bar / Flat bar: 3 ~ 650mm
Wire rod (Diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Hot search：40CrMoV4-6
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1