Home > Stainless steel > Text

N06601
2019-06-13 13:46:26 Origin： Remark：0 Click：

Specifications N06601 datasheet, N06601 Chemical, N06601 Properties from Steelmaking, ESR & VAR technique, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3. datasheet, Chemical compositio

TECHNICAL DATA SHEET - Alloy N06601

OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV

MATERIAL CATEGORY: Cr-Ni-Al Fe base alloy

CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.10

Si (％):      ≤ 0.50
Mn (％):    ≤ 1.00
P (％)≤:    0.025

S (％)≤: 0.015
Cr (％): 21.0 ~ 25.0

Ni (％): 58.0 ~ 63.0

Mo (％): -
Co (%): -

W (%): -
Al (%): 1.00 ~ 1.70

Cu (%): ≤ 1.00

Ti (%): -

Fe (% ): Remainder

TYPICAL MECHANICAL PROPERTIES UNDER ROOM TEMP.

Tensile strength, σb/≥ MPa: 550 ~ 790

Yield strength, σ0.2/MPa: 205

Elongation, δ ≥(％): 45.0
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: -
AVAILABLE FORMS AND SHAPES
Round bar (Diameter): 5.5 ~ 450mm
Square bar / Flat bar: 3 ~ 350mm

Wire rod (Diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.

Other sizes can be supplied to meet specific requirements.

TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our qualified production engineers.

Email: sales@ccsteels.com.

Hot search：N06601

Previous page：Inconel 601
Last page：Inconel 601GC

Share to：

N06601
2019-06-13 13:46:26 Origin： Remark：0 Click：

Total list

Monthly rank

N06601 2019-06-13 13:46:26 Origin： Remark：0 Click：

Extend reading：

Total list

Monthly rank

N06601
2019-06-13 13:46:26 Origin： Remark：0 Click：