X2CrTi24
2019-07-11 13:55:56 Origin： Remark：0 Click：
Material technical specifications of flat steels for pressure purpose X2CrTi24 datasheet,X2CrTi24 Chemical compositions,DIN X2CrTi24 mechanical properties from Steelmaking, ESR melting, Hot blooming, UT, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or Machined. Technical specifications - EN 10028-7. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATA SHEET - DIN X2CrTi24 & 1.4613
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Flat products made of steels for pressure purpose
Technical standards: DIN EN 10028-7 - 2016
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.030
MATERIAL CATEGORY: Flat products made of steels for pressure purpose
Technical standards: DIN EN 10028-7 - 2016
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.030
Si (％): ≤ 1.00
Mn (％): ≤ 1.00
P (％)≤: 0.035
S (％)≤: 0.020
Cr (％): 22.0~ 25.0
S (％)≤: 0.020
Cr (％): 22.0~ 25.0
Mo (％): ≤ 0.50
Ni (%): ≤ 0.50
Nb (%): ≤ 1.00
Ti (%): ≤ 1.00
TYPICAL MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: Cold rolled strip
Tensile strength, TS, σb/≥ MPa: 430 ~ 630
Yield strength, YS, σ0.2/≥ MPa: 230
Elongation, EL, δ ≥(％): 18.0
Yield strength, YS, σ0.2/≥ MPa: 230
Elongation, EL, δ ≥(％): 18.0
Reduction of area, RA, (%): -
Annealed hardness, HB ≤: -
Heat treatment pratice: Annealed 870 ~ 930 ℃, air or water cooled.
PRODUCT DESCRIPTION
The alloy is usually produced by BEF + AOD + VD, AOD + EF / EAF + VD, followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered thermal treatment or based on the buyer's special requirements.
The alloy is usually produced by BEF + AOD + VD, AOD + EF / EAF + VD, followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered thermal treatment or based on the buyer's special requirements.
PRODUCT PROFILE AND AVAILABLE FORMS
Round bar (Diameter): 5.50mm to 650mm
Square bar / Flat bar: T3 to 500mm X W3 ~ 1200mm
Round bar (Diameter): 5.50mm to 650mm
Square bar / Flat bar: T3 to 500mm X W3 ~ 1200mm
Wire rod (Diameter): 0.50mm to 16mm
Strip: T0.20~3.0 X W8.0~650mm
Length: Fixed length or random length or based on the customer's special requirement.
Length: Fixed length or random length or based on the customer's special requirement.
Other sizes can be supplied to meet specific requirements.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, please EMAIL our qualified production engineers.
If you meet further on any technical enquiry, please EMAIL our qualified production engineers.
Hot search：X2CrTi24
Previous page：1.4611
Last page：ASTM A336 Gr.F6NM
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1