X2CrCuNbTiV22-1
2019-07-12 13:49:20 Origin： Remark：0 Click：
Material technical specifications of flat steels for pressure purpose X2CrCuNbTiV22-1 datasheet, X2CrCuNbTiV22-1 Chemical compositions, Grade X2CrCuNbTiV22-1 Mechanical properties from Steelmaking, ESR melting, Hot blooming, UT, X2CrCuNbTiV22-1 Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or Machined. Technical specifications - EN 10028-7. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATA SHEET - DIN X2CrCuNbTiV22-1
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Flat products made of steels for pressure purpose
Technical standards: DIN EN 10028-7 - 2016
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.030
MATERIAL CATEGORY: Flat products made of steels for pressure purpose
Technical standards: DIN EN 10028-7 - 2016
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.030
Si (％): ≤ 1.00
Mn (％): ≤ 1.00
P (％)≤: 0.035
S (％)≤: 0.015
Cr (％): 20.0~ 24.0
S (％)≤: 0.015
Cr (％): 20.0~ 24.0
Mo (％): -
Ni (%): -
Cu (%): 0.30 ~ 0.80
Nb (%): 0.10 ~ 0.70
Ti (%): 0.10 ~ 0.70
V (%): 0.03 ~ 0.50
TYPICAL MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: Cold rolled strip
Tensile strength, TS, σb/≥ MPa: 430 ~ 630
Yield strength, YS, σ0.2/≥ MPa: 280
Elongation, EL, δ ≥(％): 22.0
Yield strength, YS, σ0.2/≥ MPa: 280
Elongation, EL, δ ≥(％): 22.0
Reduction of area, RA, (%): -
Annealed hardness, HB ≤: -
Heat treatment pratice: Annealed 870 ~ 930 ℃, air or water cooled.
PRODUCT DESCRIPTION
The alloy is usually produced by BEF + AOD + VD, AOD + EF / EAF + VD, followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered thermal treatment or based on the buyer's special requirements.
The alloy is usually produced by BEF + AOD + VD, AOD + EF / EAF + VD, followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered thermal treatment or based on the buyer's special requirements.
PRODUCT PROFILE AND AVAILABLE FORMS
Round bar (Diameter): 5.50mm to 650mm
Square bar / Flat bar: T3 to 500mm X W3 ~ 1200mm
Round bar (Diameter): 5.50mm to 650mm
Square bar / Flat bar: T3 to 500mm X W3 ~ 1200mm
Wire rod (Diameter): 0.50mm to 16mm
Strip: T0.20~3.0 X W8.0~650mm
Length: Fixed length or random length or based on the customer's special requirement.
Length: Fixed length or random length or based on the customer's special requirement.
Other sizes can be supplied to meet specific requirements.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, please EMAIL our qualified production engineers.
If you meet further on any technical enquiry, please EMAIL our qualified production engineers.
Hot search：X2CrCuNbTiV22-1
Previous page：1.4613
Last page：ASTM A336 type F22
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1