S43600
2014-10-08 16:12:03 Origin： Remark：0 Click：
Specifications S43600 datasheet, S43600 Chemical, S43600 Properties from Steelmelting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
FERRITIC STAINLESS STEEL - UNS S43600
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
MATERIAL CATEGORY: 17Cr - 1Mo Ferritic stainless
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.12
Si (％): ≤ 1.00
Mn (％): ≤ 1.00
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 16.0 ~ 18.0
Ni (％): -
Mo (％): 0.75 ~ 1.25
Nb (％): 5×C ~ 0.75
Si (％): ≤ 1.00
Mn (％): ≤ 1.00
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 16.0 ~ 18.0
Ni (％): -
Mo (％): 0.75 ~ 1.25
Nb (％): 5×C ~ 0.75
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: heavy plate, sheet, strip
Tensile strength, σb/MPa: 450
Yield strength, σ0.2/MPa: 240
Elongation, δ (％): 22.0
Reduction of area, ф (％): -
Elongation, δ (％): 22.0
Reduction of area, ф (％): -
Hardness (HBW): 183
Hardness | HRB: 89
Cold bending property: 180D
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the softened condition.
Final heat treatment - solution treatment + A
TYPICAL APPLICATIONS
Chemical equipments
Mechanical parts used in the condition of corrosion resistance
Bolts and nuts
Pressure vessel
FORMS AND DIMENSIONS
Round bar (Diameter): 5.5 ~ 550mm
Square bar / Flat bar: 3 ~ 350mm
FORMS AND DIMENSIONS
Round bar (Diameter): 5.5 ~ 550mm
Square bar / Flat bar: 3 ~ 350mm
Wire rod (Diameter): 0.10 ~ 16mm
Steel strip & rolled plate: T0.1 - 150mm X W5 - 600mm X Random length (or in coil form).
Forging piece: Different shapes based on OEM.
Steel strip & rolled plate: T0.1 - 150mm X W5 - 600mm X Random length (or in coil form).
Forging piece: Different shapes based on OEM.
Other sizes can be supplied to meet specific requirements.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers.
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers.
Hot search：S43600
Previous page：ASTM 436
Last page：AISI 439LT
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1