1.3917 Stockist, 1.3917 Equivalent Steel

1.3917
2025-04-06 10:56:00   Origin:   Remark:0 Click:

42% Nickel-base Alloy Steel Round bar 1.3917 Flat bar, Plate, 1.3917 Rod Sheet - steelmaking, ESR, Blooming, hot Forging, hot Rolling, Heat treatment
 
TECHNICAL DATA SHEET - WS 1.3917

OFFICIAL TEST CERTIFICATE: issued by TUV - SGSBV
MATERIAL CATEGORY: Nickel iron alloy
CHEMICAL COMPOSITIONS (mass weight - %)
Carbon, C (%): ≤ 0.12
Silicon, Si (%): ≤ 0.30
Manganese, Mn (%): ≤ 0.80
Phosphorus, P (%) ≤: 0.025
Sulfur, S (%) ≤: 0.015
Chromium, Cr (%): ≤ 0.25
Nickel, Ni (%): 41.0 ~ 43.0
Aluminum, Al (%): ≤ 0.10
HOT WORKING, HEAT TREATMENT AND MECHANICAL PROPERTIES
Solution treatment temperature: 1020 ~ 1070℃
Tensile strength, Rm ≥ MPa: 510
Yeild strength, Rp0.2 ≥ MPa: 290
Elongation, A5 ≥ (%): 43.0
Impact, Akv ≥ J: -
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - solution treatment or solution + aged.
PROFILE AND DIMENSIONS
Round bar / disc (diameter): 5.5mm to 450mm
Square bar / flat bar: 8mm to 500mm
Wire rod (Diameter):  5.5mm to 16mm
Length: Fixed length or random length or based on the customer's special requirement.
Sheet steel via cold rolled: T0.5 - 6mm X W10 - 400mm X L, or in coil form.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers.E-mail:
sales@ccsteels.com

Hot search:1.3917

Previous page:ASTM F30 / Nilo 42
Last page:K94100

Share to: