S90941
2019-09-05 09:55:07 Origin： Remark：0 Click：
Standard Specification for Pressure Vessel Plates alloy steel, Chromium-Molybdenum steel S90941 datasheet,UNS S90941 Chemical composition, UNS S90941 Mechanical property from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or rough turned machining. Technical specification - ASTM A387 - 2017.
TECHNICAL DATA SHEET - UNS S90941
MATERIAL TECHNICAL STANDARDS: ASTM A387 - 2017
Mn (％): 0.30 ~ 0.60
Si (％): ≤ 1.00
Si (％): ≤ 1.00
P (％)≤: 0.025
S (％)≤: 0.025
Cr (%): 9.00 ~ 10.0
Mo (%): 0.90 ~ 1.10
S (％)≤: 0.025
Cr (%): 9.00 ~ 10.0
Mo (%): 0.90 ~ 1.10
Ni (%): -
V (%): ≤ 0.04
Nb (%): -
Cu (%): -
B (%): -
W (%): -
Al (%): -
Ti (%): -
TYPICAL MECHANICAL PROPERTIES
Tensile strength, σb/≥ MPa: 415 ~ 585
Yield strength, σ0.2/MPa: 205
Elongation, δ ≥(％): 18.0
Reduction of area, ф ≥ (％): 45.0
Hardness via heat treatment /HBW: 255 MAX.
Reduction of area, ф ≥ (％): 45.0
Hardness via heat treatment /HBW: 255 MAX.
PRODUCT DESCRIPTION
The alloy is usually produced by BEF /EAF + VD followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 0.50mm to 600mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
The alloy is usually produced by BEF /EAF + VD followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 0.50mm to 600mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
Hot search：S90941
Previous page：S90941
Last page：ASTM A387 type 91
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1