S90901
2019-09-09 09:15:08 Origin: Remark:0 Click:
S90901 is a Chromium - Molybdenum - Vanadium base steel, made from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment - ASTM A387 - 2017.
TECHNICAL DATA SHEET - Grade UNS S90901
MATERIAL TECHNICAL STANDARDS: ASTM A387 - 2017
MATERIAL TYPE: 9Cr - 1.0Mo - 0.22V Alloy steel
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (%): 0.08 ~ 0.12
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (%): 0.08 ~ 0.12
Manganese, Mn (%): 0.30 ~ 0.60
Silicon, Si (%) : 0.20 ~ 0.50
Silicon, Si (%) : 0.20 ~ 0.50
Phosphorus, P (%) ≤: 0.020
Sulfur, S (%) ≤: 0.010
Chromium, Cr (%): 8.00 ~ 9.50
Molybdenum, Mo (%): 0.85 ~ 1.05
Sulfur, S (%) ≤: 0.010
Chromium, Cr (%): 8.00 ~ 9.50
Molybdenum, Mo (%): 0.85 ~ 1.05
Nickel, Ni (%): ≤ 0.40
Vanadium, V (%): 0.18 ~ 0.25
Niobium, Nb (%): 0.06 ~ 0.10
Copper, Cu (%): -
Boron, B (%): -
Nitrogen, N (%): 0.030 ~ 0.070
Aluminium, Al (%): ≤ 0.020
Titanium, Ti (%): ≤ 0.01
TYPICAL MECHANICAL PROPERTIES
Tensile strength, σb/≥ MPa: 585 ~ 760
Yield strength, σ0.2/MPa: 415
Elongation, δ ≥(%): 18.0
Reduction of area, ф ≥ (%): 45.0
Hardness via heat treatment /HBW: 235 Max.
Reduction of area, ф ≥ (%): 45.0
Hardness via heat treatment /HBW: 235 Max.
PRODUCT DESCRIPTION
The alloy is usually produced by BEF /EAF + VD followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / disc (diameter): 5.50mm to 600mm
Square bar / Flat bar: 3mm to 800mm
Length: fixed length, random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts, other different shapes based on OEM.
The alloy is usually produced by BEF /EAF + VD followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / disc (diameter): 5.50mm to 600mm
Square bar / Flat bar: 3mm to 800mm
Length: fixed length, random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. Email: sales@ccsteels.com.
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. Email: sales@ccsteels.com.
Hot search:S90901
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1