Z10CKD10
2019-12-12 14:35:56 Origin： Remark：0 Click：
Description Z10CKD10 Specifications, Stocklist Z10CKD10 Suppliers,Z10CKD10 Forge bar plate machined, Z10CKD10 Alloy exporter. from Melting, ESR technique, hot blooming, Hot forging & rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test
TECHNICAL DATASHEET - Grade Z10CKD10
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MELTING PROCESS - EAF + VD + LF / BEF + ESR
H S CODE For Customs - 7228 4000 / 7228 5000 / 7228 6000
H S CODE For Customs - 7228 4000 / 7228 5000 / 7228 6000
CHEMICAL COMPOSITION (Mass weight - %)
C (％): 0.05 ~ 0.12
Si (％): 0.10 ~ 0.80
Mn (％): 0.60 ~ 1.10
P (％)≤: 0.025
S (％)≤: 0.020
Cr (％): 9.50 ~ 11.5
Ni (％): 0.20 ~ 0.80
Mo (％): 0.50 ~ 1.00
Si (％): 0.10 ~ 0.80
Mn (％): 0.60 ~ 1.10
P (％)≤: 0.025
S (％)≤: 0.020
Cr (％): 9.50 ~ 11.5
Ni (％): 0.20 ~ 0.80
Mo (％): 0.50 ~ 1.00
Nb/Ti (%): 0.20 ~ 0.60
Other(％): V 0.10 ~ 0.60, N 0.010 ~ 0.035, B 0.004 ~ 0.012, Co 5.00 ~ 7.50
HEAT TREATMENT AND MECHANICAL PROPERTIES
Heat treatment temperature and cooling: Heat treatment
Tensile strength, σb≥/MPa: 1050 ~ 1250
Tensile strength, σb≥/MPa: 1050 ~ 1250
Yield strength, σ0.2≥/MPa: 915
Elongation, δ5 (%)≥: 12.0
Hardness ≤HBW: 301 ~ 355
Elongation, δ5 (%)≥: 12.0
Hardness ≤HBW: 301 ~ 355
PRODUCT PROFILE
Round bar / Wire rod (Diameter1): 5.5mm to 800mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Wire rod (Diameter1): 5.5mm to 800mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W100 ~ 1000mm X L1000 ~ 4000mm
Sheet steel via cold rolled: T1.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.5 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com
) our resident team of qualified production engineers.
Sheet steel via cold rolled: T1.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.5 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com
) our resident team of qualified production engineers.
Hot search：Z10CKD10
Previous page：STS420F
Last page：10NiCrMo13-5
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1