XM-33 Stockist, XM-33 Equivalent Steel

XM-33
2014-10-09 14:59:30   Origin:   Remark:0 Click:

Specifications XM-33 Datasheet, XM-33 Chemical, XM-33 Properties Steelmelting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treatment
 
TECHNICAL DATA SHEET - AISI XM-33
MATERIAL CATEGORY - 26Cr-1Mo-Ti Ferrite type
MATERIAL SPECIFICATIONS - ASTM A959 (2004), A276, A312, A632, A176, A580
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (%): ≤ 0.06
Silicon, Si (%): ≤ 0.75
Manganese, Mn (%): ≤ 0.75
Phosphorus, P (%) ≤: 0.040
Sulfur, S (%) ≤: 0.020
Chromium, Cr (%): 25.0 ~ 27.0
Nickel, Ni (%): ≤ 0.50
Molybdenum, Mo (%): 0.75 ~ 1.50
Titanium, Ti (%): 0.20 ~ 1.00
Others (%): Copper, Cu ≤ 0.20, Nitrogen, N ≤ 0.04 
MECHANICAL PROPERTIES FINAL HEAT TREATMENT
Form: heavy plate, sheet, strip
Tensile strength, Rm / MPa: 470
Yield strength, Rp0.2 / MPa: 310
Elongation, A5 (%): 20
Reduction of area, Z (%):  -
Hardness (HBW):  217
Hardness | HRB:  96
Cold bending property: 180D
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TYPICAL APPLICATIONS
Chemical equipment and parts.
Mechanical parts used in the condition of corrosion resistance.
Bolt and nuts, Pressure vessel.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email:
sales@ccsteels.com.
PRODUCT PROFILE AND SIZES 
Round bar / Disc (diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 640mm
Plate / Sheet steel / Steel strip: 0.1mm to 500mm
Width: 8mm to 1200mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts, and other different shapes based on OEM.

Hot search:XM-33

Previous page:UNS S44625
Last page:S44626

Share to: