A182 Gr.S41026
2020-04-03 14:16:55 Origin： Remark：0 Click：
A182 Gr.S41026 Specifications, A182 Gr.S41026 Chemical, A182 Gr.S41026 Forging Bar & Plate Machined, Alloy Exporters Ex-stock Sale - Technical standards - ASTM A182 - 2018.or by agreement.
TECHNICAL DATA SHEET - ASTM A182 Grade S41026
MATERIAL TECHNICAL STANDARDS: ASTM A182 - 2018
MATERIAL TYPE: Martensitic Stainless steel
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.15
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.15
Mn (％): ≤ 1.00
Si (％): ≤ 1.00
Si (％): ≤ 1.00
P (％)≤: 0.020
S (％)≤: 0.020
Cr (%): 11.5 ~ 13.0
Mo (%): 0.40 ~ 0.60
S (％)≤: 0.020
Cr (%): 11.5 ~ 13.0
Mo (%): 0.40 ~ 0.60
Ni (%): 1.00 ~ 2.00
Nb (%): -
Ti (%): -
MECHANICAL PROPERTY UNDER ROOM TEMP.
Tensile strength, σb/≥ MPa: 760 ~ 930
Yield strength, σ0.2/MPa: 620
Elongation, δ ≥(％): 16.0
Reduction of area, ф ≥ (％): 45.0
Hardness via heat treatment /HBW: 235 ~ 285
Reduction of area, ф ≥ (％): 45.0
Hardness via heat treatment /HBW: 235 ~ 285
HEAT TREATMENT PRACTICE
Condition: Quenching 955 Deg.
Cooling medium: air cooling
Tempering temperature: 620 Deg.
PRODUCT DESCRIPTION
The alloy is usually produced by BEF & BEF + AOD & EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.50mm to 600mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 ~ 400mm X W60 ~ 1000mm X L1000 ~ 3500mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
The alloy is usually produced by BEF & BEF + AOD & EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.50mm to 600mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 ~ 400mm X W60 ~ 1000mm X L1000 ~ 3500mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical inquiry. pleased to Email (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical inquiry. pleased to Email (sales@ccsteels.com) our resident team of qualified production engineers.
Previous page：ASTM A182 Grade F6b
Last page：K93600
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1