S44660
2024-12-03 11:26:00 Origin： Remark：0 Click：
Specifications S44660 Technical datasheet, Inventory S44660 Round bar, Flat bar, Plate Properties from Steelmaking (EF / VIM ), ESR & VAR technique, Hot forging, Hot rolling
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
TECHNICAL DATA SHEET - S44660
SPECIAL MELTING PROCESS - EAF + AOD / + ESR
MATERIAL CATEGORY - Stainless steel round bar, wire rod, and semi-finished products
STEEL TYPE - Ferritic stainless steel series
HS Code For Customs - 72221100 / 72221900 / 72222000
MATERIAL SPECIFICATIONS - ASTM A959 (2004), A276, A312, A632, A176, A580
CHEMICAL COMPOSITION (mass Weight - %)
Carbon, C (％): ≤ 0.030
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 25.0 ~ 28.0
Nickel, Ni (％): 1.00 ~ 3.50
Molybdenum, Mo (％): 3.00 ~ 4.00
Other (％): (Ti+Nb) 0.20 ~ 1.00 ~ 6×(C+N) , N ≤ 0.040
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 25.0 ~ 28.0
Nickel, Ni (％): 1.00 ~ 3.50
Molybdenum, Mo (％): 3.00 ~ 4.00
Other (％): (Ti+Nb) 0.20 ~ 1.00 ~ 6×(C+N) , N ≤ 0.040
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition of thermal treatment: +A ( annealed)
Hardness under annealed ≤HBS: 245
Tensile strength σb / MPa: 585
Yield strength σ0.2 ≥ MPa: 450
Elongation δ5 ≥ (％): 18.0
Elongation δ (transversal ) ≥ (％): -
Impact absorbing power Akv ≥ J : -
Yield strength σ0.2 ≥ MPa: 450
Elongation δ5 ≥ (％): 18.0
Elongation δ (transversal ) ≥ (％): -
Impact absorbing power Akv ≥ J : -
PRODUCT DESCRIPTION
The alloy is usually produced by EAF AOD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - solution treatment + aged
The alloy is usually produced by EAF AOD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - solution treatment + aged
PROFILE & DIMENSIONS
Round bar / rod / disc (diameter): 5.5mm to 850mm
Square bar / Flat bar: 8mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / rod / disc (diameter): 5.5mm to 850mm
Square bar / Flat bar: 8mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy / middle plate via hot rolled: T60 - 400mm X W70 - 1500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
Hot search：S44660
Previous page：ASTM 26-3-3
Last page：ASTM 29-4
Total list
Monthly rank
- 49X35CrMo17
- 48ASTM A565 Gr.616HT
- 44Z15CN17-03
- 37ASTM A638 Gr.660
- 30AISI 306
- 27P550
- 25X12CrMoWVNbN10-1-1
- 24X10CrNiW17-13-3
- 22SAE 51420
- 20X120Mn13