ASTM A182 Gr. S41500
2020-04-13 08:54:54 Origin： Remark：0 Click：
S41500 Steels Specifications, S41500 Round bar, flat bar, Forgings S41500 Forging Bar & Plate Machined, UNS S41500 Alloy Exporters Ex-stock Sale.
TECHNICAL DATA SHEET - ASTM A182 Grade S41500
MATERIAL TECHNICAL STANDARDS: ASTM A182 - 2018
MATERIAL TYPE: Martensitic Stainless steel
CHEMICAL COMPOSITION (mass weight %)
Carbon, C (％): ≤ 0.05
CHEMICAL COMPOSITION (mass weight %)
Carbon, C (％): ≤ 0.05
Manganese Mn (％): 0.50 ~ 1.00
Silicon, Si (％): ≤ 0.60
Silicon, Si (％): ≤ 0.60
Phosphorus, P (％)≤: 0.030
Sulfur, S (％)≤: 0.030
Chromium, Cr (%): 11.5 ~ 14.0
Molybdenum, Mo (%): 0.50 ~ 1.00
Sulfur, S (％)≤: 0.030
Chromium, Cr (%): 11.5 ~ 14.0
Molybdenum, Mo (%): 0.50 ~ 1.00
Nickel, Ni (%): 3.50 ~ 5.50
Niobium, Nb (%): -
Titanium, Ti (%): -
MECHANICAL PROPERTY UNDER ROOM TEMP.
Tensile strength, σb/≥ MPa: 790
Yield strength, σ0.2/MPa: 620
Elongation, δ ≥(％): 15.0
Reduction of area, ф ≥ (％): 45.0
Hardness via heat treatment /HBW: 295 Max.
Reduction of area, ф ≥ (％): 45.0
Hardness via heat treatment /HBW: 295 Max.
HEAT TREATMENT PRACTICE
Condition: Quenching 1010 Deg.
Cooling medium: air cooling
Tempering temperature: 560 ~ 600 Deg.
PRODUCT DESCRIPTION
The alloy is usually produced by BEF & BEF + AOD & EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.50mm to 600mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 ~ 400mm X W60 ~ 1000mm X L1000 ~ 3500mm
Forging piece: stepped shafts, other different shapes based on OEM.
The alloy is usually produced by BEF & BEF + AOD & EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.50mm to 600mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 ~ 400mm X W60 ~ 1000mm X L1000 ~ 3500mm
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical inquiry, pleased to E-mail (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical inquiry, pleased to E-mail (sales@ccsteels.com) our resident team of qualified production engineers.
Hot search：ASTM A182 Gr. S41500
Previous page：ASTM A182 type F6NM
Last page：AISI 418
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1