Custom 465
2020-04-22 14:02:18 Origin： Remark：0 Click：
Specifications Custom 465 Round bar, Flat bar, Plate Custom 465 Suppliers, Inventory S46500 Property from steelmaking, Hot forging & Rolling, Heat treatment
MARTENSITIC STEEL DATASHEET - Custom 465
MATERIAL CATEGORY: Precipitation hardening type 12Cr-11Ni-1Mo-2Ti
PRODUCT DESCRIPTION
The alloy is usually produced by BEF + AOD / VD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment + aged.
The alloy is usually produced by BEF + AOD / VD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment + aged.
MATERIAL SPECIFICATIONS - ASTM A959 (2004), A276, A312, A632, A176, A580, A564
TYPICAL CHEMICAL COMPOSITION (mass fraction - %)
Carbon, C (％): ≤ 0.020
Silicon, Si (％): ≤ 0.25
Manganese, Mn (％): ≤ 0.25
Phosphorus, P (％) ≤: 0.015
Sulfur, S (％) ≤: 0.010
Chromium, Cr (％): 11.0 ~ 12.5
Nickel, Ni (％): 10.7 ~ 11.3
Molybdenum, Mo (％): 0.75 ~ 1.25
Nitrogen, N (&): -
Titanium, Ti (％): 1.50 ~ 1.80
Silicon, Si (％): ≤ 0.25
Manganese, Mn (％): ≤ 0.25
Phosphorus, P (％) ≤: 0.015
Sulfur, S (％) ≤: 0.010
Chromium, Cr (％): 11.0 ~ 12.5
Nickel, Ni (％): 10.7 ~ 11.3
Molybdenum, Mo (％): 0.75 ~ 1.25
Nitrogen, N (&): -
Titanium, Ti (％): 1.50 ~ 1.80
MECHANICAL PROPERTIES FINAL HEAT TREATMENT
Forms: bar, steel plate, strip
Condition: solution treatment
Tensile strength, Rm / MPa: 1215
Yield strength, Rp0.2 / MPa: 1100
Elongation, A5 (％): 5.0
Reduction of area, Z (％): 34
Elongation, A5 (％): 5.0
Reduction of area, Z (％): 34
Hardness | HRW: 361min, HRC 36min.
TYPICAL APPLICATIONS
Chemical equipments and parts.
Mechanical parts used in the condition of corrosion resistance.
Bolt and nuts, Pressure vessel.
Chemical equipments and parts.
Mechanical parts used in the condition of corrosion resistance.
Bolt and nuts, Pressure vessel.
PRODUCT PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5 ~ 450mm
Square bar / Flat bar: 8 ~ 610mm
Plate / Sheet steel / Steel strip: 0.1mm to 300mm
Width: 8mm to 1000mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts, and other different shapes based on OEM.
Round bar / Wire rod (Diameter): 5.5 ~ 450mm
Square bar / Flat bar: 8 ~ 610mm
Plate / Sheet steel / Steel strip: 0.1mm to 300mm
Width: 8mm to 1000mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts, and other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1