ASTM B511 Gr.N08332 Stockist, ASTM B511 Gr.N08332 Equivalent Steel

ASTM B511 Gr.N08332
2019-04-18 09:26:00   Origin:   Remark:0 Click:

ASTM B511 Gr.N08332 Blade Steel, ASTM B511 Gr.N08332 Suppliers, ASTM B511 Gr.N08332 Forging Bar plate machined, Ex-stock Alloy Exporters, Technical specifications - ASTM A982 - 2015. From Melting, ESR & VAR technique, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, Ultrasonic flaw detection test.

TECHNICAL DATA SHEET - ASTM B511 Grade N08332


TECHNICAL SPECIFICATIONS: ASTM B511 - 2016
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS -  BV
MATERIAL CATEGORY: This specification covers Stainless
steel forgings for compressor and turbine bucket, blade, and airfoil applications.
CHEMICAL COMPOSITION (WEIGHT %)
C (%):     0.05 ~0.10
Si (%):     0.75 ~ 1.50
Mn (%):   ≤ 2.00
P (%) ≤:  0.030
S (%) ≤:  0.015
Cr (%):    17.0 ~ 20.0
Ni (%):    34.0 ~ 37.0
Cu (%):   ≤ 1.00
Sn (%):   ≤ 0.025
Pb (%):   ≤ 0.005
Fe (%):    Remainder
MECHANICAL PROPERTY UNDER ROOM TEMP.
Tensile strength, σb/ ≥ MPa: 465
Yield strength, σ0.2/ ≥ MPa: 190
Elongation, δ (%) ≥: 30.0
Reduction of area, ф (%) ≥: -
Impact strength, AKv: -
Hardness ≤ (HBW):  255 Max.
HEAT TREATMENT PRACTICE
Condition: Solution annealed 1150 Deg.C (Min.), oil or air cooling.
MELTING PROCESS
The alloy is usually produced by BEF + AOD / EAF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
FORMS AVAILABLE
Round bar (Diameter): 5.5 ~ 600mm
Wire rod (Diameter): 3.0 ~ 13.0mm
Flat bar (width X thickness): 10 ~ 400 X 15 ~ 800mm
Length: random length, fixed length or based on the customer's special requirements.
Form: wire or straightened bar
TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry, pleased to EMAIL 
our resident team of qualified production engineers, Email: sales@ccsteels.com

Hot search:ASTM B511 Gr. N08332

Previous page:ASTM A982 Grade C
Last page:N08332

Share to: