F309H Stockist, F309H Equivalent Steel

F309H
2020-07-07 10:06:16   Origin:   Remark:0 Click:

F309H Specifications, F309H Datasheet, F309H Description, F309H Flat Bar Forging Ex-stock & Plate Heat treatment Machined, Rod Exporters Ex-stock Sale - Technical standards - ASTM A182 - 2018.or by agreement.
TECHNICAL DATA SHEET - ASTM A182 Grade F309H

MATERIAL TECHNICAL STANDARDS: ASTM A182 - 2018
MATERIAL TYPE: Austenitic Stainless steel
CHEMICAL COMPOSITION (WEIGHT %)
C (%):     0.04 ~ 0.10
Mn (%):   ≤ 2.00
Si (%):    ≤ 1.00
P (%)≤:   0.035
S (%)≤:   0.020
Ni (%):    12.0 ~ 15.0
Mo (%):   -
Cr (%):    22.0 ~ 24.0
Nb (%):   -
Ti (%):     -
N (%):     -
MECHANICAL PROPERTY UNDER ROOM TEMP.
Tensile strength, σb/≥ MPa: 515
Yield strength, σ0.2/MPa: 205
Elongation, δ ≥(%): 30.0
Reduction of area, ф ≥ (%): 50.0
Hardness via heat treatment /HBW: -
HEAT TREATMENT PRACTICE
Condition: solution annealing
Cooling medium: Furnace cooling
Tempering temperature: 1040 Deg.C
PRODUCT DESCRIPTION
The alloy is usually produced by BEF & BEF + AOD & EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 ~ 400mm X W60 ~ 1000mm X L1000 ~ 3500mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical inquiry, pleased to E-mail (
sales@ccsteels.com) our resident team of qualified production engineers.

Hot search:F309H

Previous page:1.6943
Last page:28NiCrMoV8-5 / 1.6932

Share to: