F316N
2020-08-28 15:45:11 Origin： Remark：0 Click：
Specifications F316N, Ex-stock F316N Datasheet, F316N Chemical Flat Bar Forging Ex-stock & Plate Heat treatment Machined, Rod Exporters Ex-stock Sale - Technical standards - ASTM A182 - 2018.or by agreement.
TECHNICAL DATA SHEET - ASTM A182 Grade F316N
MATERIAL TECHNICAL STANDARDS: ASTM A182 - 2018
MATERIAL TYPE: 17Cr - 13Ni - 2Mo Austenitic Stainless steel
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.08
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.08
Mn (％): ≤ 2.00
Si (％): ≤ 1.00
Si (％): ≤ 1.00
P (％)≤: 0.035
S (％)≤: 0.020
Cr (%): 16.0 ~ 18.0
Mo (%): 2.00 ~ 3.00
S (％)≤: 0.020
Cr (%): 16.0 ~ 18.0
Mo (%): 2.00 ~ 3.00
Ni (%): 11.0 ~ 14.0
Nb (%): -
Ti (%): -
N (%): 0.10 ~ 0.16
MECHANICAL PROPERTY UNDER ROOM TEMP.
Tensile strength, σb/≥ MPa: 550
Yield strength, σ0.2/MPa: 240
Elongation, δ ≥(％): 30.0
Reduction of area, ф ≥ (％): 50.0
Hardness via heat treatment /HBW: -
Reduction of area, ф ≥ (％): 50.0
Hardness via heat treatment /HBW: -
HEAT TREATMENT PRACTICE
Condition: solution annealing
Cooling medium: water or oil cooling
Tempering temperature: 1040 Deg.C
PRODUCT DESCRIPTION
The alloy is usually produced by BEF & BEF + AOD & EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 ~ 400mm X W60 ~ 1000mm X L1000 ~ 3500mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
The alloy is usually produced by BEF & BEF + AOD & EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 ~ 400mm X W60 ~ 1000mm X L1000 ~ 3500mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical inquiry, pleased to E-mail (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical inquiry, pleased to E-mail (sales@ccsteels.com) our resident team of qualified production engineers.
Hot search：F316N
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1