Aquamet 18
2020-09-21 15:48:08 Origin： Remark：0 Click：
Aquamet 18 is defined as an Austenitic, Corrosion-resistance Steel comparable to that of AISI 304. it provides a strength advantage over AQUAMET 19.
MATERIAL DATA SHEET - Aquamet 18
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
Material category - nonmagnetic special alloys
Shaft stock list - Diam.95mm / 100mm / 110mm / 120mm / 140mm
HS code - 72221100 / 72221900 / 72222000
Material category - nonmagnetic special alloys
Shaft stock list - Diam.95mm / 100mm / 110mm / 120mm / 140mm
HS code - 72221100 / 72221900 / 72222000
Main chemical composition (mass weight - %)
Carbon, C (％): ≤ 0.15
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): 11.0 ~ 14.0
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 16.5 ~ 19.0
Carbon, C (％): ≤ 0.15
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): 11.0 ~ 14.0
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 16.5 ~ 19.0
Nickel, Ni (％): 0.50 ~ 2.50
Molybdenum, Mo (％): -
Molybdenum, Mo (％): -
Copper, Cu (%): -
Nitrogen, N (%): 0.20 ~ 0.45
Nitrogen, N (%): 0.20 ~ 0.45
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, σb/≥ MPa: 825
Yield strength, σ0.2/≥ MPa: 620
Elonghation, δ ≥(％): 20.0
Reduction of area, ф ≥ (％): 45.0
Hardness | HB:
FORMS AND DIMENSIONS
Round bar (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 10mm to 500mm
Steel strip via cold rolled: T0.5 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Yield strength, σ0.2/≥ MPa: 620
Elonghation, δ ≥(％): 20.0
Reduction of area, ф ≥ (％): 45.0
Hardness | HB:
FORMS AND DIMENSIONS
Round bar (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 10mm to 500mm
Steel strip via cold rolled: T0.5 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry or help, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers.
If you meet further on any technical enquiry or help, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers.
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1