F321
2020-10-26 08:13:43 Origin： Remark：0 Click：
Technical standards - ASTM A182 Austenitic Steel F321 round bar, Plate, Flat bar Datasheet, F321 Rod Chemical Heat treatment Machined
TECHNICAL DATA SHEET - ASTM A182 Grade F321
MATERIAL TECHNICAL STANDARDS - ASTM A182 - 2018
MATERIAL TYPE - 18Cr 11Ni Ti Austenitic Stainless steel
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): ≤ 0.08
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): ≤ 0.08
Manganese, Mn (％): ≤ 2.00
Silicon, Si (％): ≤ 1.00
Silicon, Si (％): ≤ 1.00
Phosphorus, P (％ )≤: 0.030
Sulfur, S (％) ≤: 0.010
Nickel, Ni (%): 9.00 ~ 12.0
Sulfur, S (％) ≤: 0.010
Nickel, Ni (%): 9.00 ~ 12.0
Chromium, Cr (%): 17.0 ~ 19.0
Molybdenum, Mo (%): -
Niobium, Nb (%): -
Nitrogen, N (%): ≤ 0.10
Titanium, Ti (%): 5 X C ~ 0.70
MECHANICAL PROPERTY UNDER ROOM TEMP.
Tensile strength, Rm ≥ MPa: 515
Yield strength, Rp0.2 / MPa: 205
Elongation, A5 ≥ (％): 30.0
Reduction of area, Z ≥ (％): 50.0
Hardness via heat treatment /HBW: -
Reduction of area, Z ≥ (％): 50.0
Hardness via heat treatment /HBW: -
HEAT TREATMENT PRACTICE
Condition: solution annealing
Cooling medium: water or oil cooling
Tempering temperature: 1080 ~ 1180 Deg.C
PRODUCT MELTING & AVAILABLE DIMENSIONS
The alloy is usually produced by BEF & BEF + AOD & EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (diameter): 5.5mm to 500mm
Square bar / Flat bar: 6mm to 600mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 ~ 550mm X W60 ~ 1000mm X L1000 ~ 3500mm
Forging piece: stepped shafts, other different shapes based on OEM.
The alloy is usually produced by BEF & BEF + AOD & EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (diameter): 5.5mm to 500mm
Square bar / Flat bar: 6mm to 600mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 ~ 550mm X W60 ~ 1000mm X L1000 ~ 3500mm
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical inquiry, pleased to E-mail (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical inquiry, pleased to E-mail (sales@ccsteels.com) our resident team of qualified production engineers.
Hot search：F321
Previous page：ASTM A182 Gr.S32053
Last page：EN30B
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1