1.4114
2021-02-25 10:46:49 Origin： Remark：0 Click：
Specifications 1.4114 is high content of 18.0% - Chromium and 2.0% - Molybdenum Free cutting Stainelss Steel, Hot forging, Hot rolling, Heat treatment
TECHNICAL DATASHEET - 1.4114
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
MATERIAL CATEGORY - Stainless Steel Flat or plate
Technical standards - NF FD A35-570 - 96
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): ≤ 0.08
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 2.50
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.15 ~ 0.35
Chromium, Cr (％): 17.5 ~ 19.5
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.15 ~ 0.35
Chromium, Cr (％): 17.5 ~ 19.5
Molybdenum, Mo (％): 1.50 ~ 2.50
Nitrogen, Ni (%): ≤ 0.75
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, Rm ≥ MPa: 430
Yield strength, Rp0.2/ ≥ MPa: 250
Elongation, A5 ≥ (％): 20.0
Yield strength, Rp0.2/ ≥ MPa: 250
Elongation, A5 ≥ (％): 20.0
Reduction of area, Z (%): -
Annealed hardness, HB ≤: -
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / EF / EAF steel remelting.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered thermal treatment
The alloy is usually produced by AOD / EF / EAF steel remelting.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered thermal treatment
PRODUCT PROFILE & DIMENSIONS
Round bar / rod / disc (diameter): 5.5 to 800mm
Square bar / Flat bar: T8.0 to 500mm X W3.0 ~ 1000mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T3.0 - 200mm X W1000- 2500mm X L1000-12000mm
Square bar / Flat bar: T8.0 to 500mm X W3.0 ~ 1000mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T3.0 - 200mm X W1000- 2500mm X L1000-12000mm
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, you can EMAIL our qualified production engineers, Email: sales@ccsteels.com
If you meet further on any technical enquiry, you can EMAIL our qualified production engineers, Email: sales@ccsteels.com
Hot search：1.4114
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1