XM-32Mod
2021-06-28 08:42:46 Origin： Remark：0 Click：
Specifications XM-32Mod Datasheet, Ex-stock supplier XM-32Mod Chemical, Inventory XM-32Mod Properties forgings From Melting, ESR & VAR technique, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATA SHEET - Grade XM-32Mod
TECHNICAL SPECIFICATIONS - ASTM A1021 (2015)
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
TECHNICAL SPECIFICATIONS - ASTM A1021 (2015)
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
INVENTORY SALES - Diameter 90mm / 200mm
MATERIAL CATEGORY - Martensitic stainless steel
CHEMICAL COMPOSITION ( Mass Weight %)
MATERIAL CATEGORY - Martensitic stainless steel
CHEMICAL COMPOSITION ( Mass Weight %)
C (％): 0.10 ~ 0.17
Si (％): ≤ 0.35
Mn (％): 0.65 ~ 1.05
P (％)≤: 0.020
S (％)≤: 0.015
Cr (％): 11.25 ~ 12.75
Ni (％): 2.25 ~3.25
Mo (％): 1.50 ~2.00
Si (％): ≤ 0.35
Mn (％): 0.65 ~ 1.05
P (％)≤: 0.020
S (％)≤: 0.015
Cr (％): 11.25 ~ 12.75
Ni (％): 2.25 ~3.25
Mo (％): 1.50 ~2.00
V (%): 0.25 ~ 0.40
N (%): 0.02 ~ 0.045
W (％): ≤ 0.10
Al (％): ≤ 0.025
Cu (％): ≤ 0.50
MECHANICAL PROPERTIES UNDER HEAT TREATMENT ( Q + T)
Tensile strength, σb/MPa: 1000
Yield strength, σ0.2/MPa: 795
Elongation, δ(％): 15.0
Yield strength, σ0.2/MPa: 795
Elongation, δ(％): 15.0
Reduction of area, ф ≥ (％): 30.0
Impact strength, Akv ≥/J: 41 Min.
Hardness via heat treatment /HBW: 352 Max.
METHOD OF MELTING
The alloy is usually produced by BEF - AOD / EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Hardness via heat treatment /HBW: 352 Max.
METHOD OF MELTING
The alloy is usually produced by BEF - AOD / EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
TYPICAL APPLICATIONS
Chemical equipment
Mechanical parts used in the condition of corrosion resistance
Bolts and nuts
Pressure vessel parts
Chemical equipment
Mechanical parts used in the condition of corrosion resistance
Bolts and nuts
Pressure vessel parts
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 520mm
Flat bar / plate (Thickness X Width): 10 ~ 400 X 15 ~ 650mm
Round bar (Diameter): 5.5 ~ 520mm
Flat bar / plate (Thickness X Width): 10 ~ 400 X 15 ~ 650mm
Plate: 0.5 ~ 30 X 12 ~ 1200 X Lmm
Length: random length, fixed length or based on the customer's special requirement.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@ccsteels.com.
Length: random length, fixed length or based on the customer's special requirement.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@ccsteels.com.
Hot search：XM-32Mod
Previous page：ASTM A1021 Grade C
Last page：ASTM A1021 type D
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1