F48
2021-07-21 10:06:30 Origin： Remark：0 Click：
Inventory F48 Specifications, Suppliers F48 Datasheet Chemical, Stocklist F48 Properties Forging Ex-stock & Plate F48 Heat treatment Machined, Rod Exporters Ex-stock Sale - Technical standards - ASTM A182 - 2018.or by agreement.100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATASHEET - ASTM A182 Grade F48
MATERIAL TECHNICAL STANDARDS - ASTM A182 - 2018
STEEL MATERIAL TYPE - 18Cr-14Ni-4Mo Austenitic Stainless steel
Customs HS Code - 72221100 / 72221900
Customs HS Code - 72221100 / 72221900
CHEMICAL COMPOSITION ( Mass Weight % )
C (％): ≤ 0.030
C (％): ≤ 0.030
Mn (％): ≤ 2.00
Si (％): ≤ 0.75
Si (％): ≤ 0.75
P (％)≤: 0.045
S (％)≤: 0.030
Ni (%): 13.0 ~ 17.5
S (％)≤: 0.030
Ni (%): 13.0 ~ 17.5
Cr (%): 17.0 ~ 20.0
Mo (%): 4.00 ~ 5.00
N (%): 0.10 ~ 0.20
MECHANICAL PROPERTY UNDER ROOM TEMP.
Forms: Round bar, flat bar, forgings and plate
Tensile strength, σb/≥ MPa: 550
Yield strength, σ0.2/MPa: 240
Elongation, δ ≥(％): 40.0
Reduction of area, ф ≥ (％): 50.0
Hardness via heat treatment /HBW: -
Reduction of area, ф ≥ (％): 50.0
Hardness via heat treatment /HBW: -
HEAT TREATMENT PRACTICE
Condition: solution annealing 1040 Deg. C (+AT)
Cooling medium: water or oil cooling
Tempering temperature: -
MELTING & AVAILABLE DIMENSIONS
The alloy is usually produced by BEF & BEF + AOD & EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.5mm ~ 500mm
Square bar / Flat bar: 10mm to 650mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T10 ~ 400mm X W60 ~ 1200mm X L1000 ~ 3500mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
The alloy is usually produced by BEF & BEF + AOD & EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.5mm ~ 500mm
Square bar / Flat bar: 10mm to 650mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T10 ~ 400mm X W60 ~ 1200mm X L1000 ~ 3500mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical inquiry or help, pleased to E-mail our resident team of qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical inquiry or help, pleased to E-mail our resident team of qualified production engineers, Email: sales@ccsteels.com.
Hot search：F48
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1