1.4543
2021-07-22 09:38:31 Origin: Remark:0 Click:
Martensitic Stainless Steel 1.4543 Datasheet, Round bar, Flat bar 1.4543 Hot forgings From Melting, ESR & VAR technique, Blooming, Cold machined.
TECHNICAL DATA SHEET - Grade 1.4543
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
INVENTORY SALES - Diameter 55mm / 60mm
MATERIAL CATEGORY - Martensitic stainless steel
CHEMICAL COMPOSITION (mass weight - %)
MATERIAL CATEGORY - Martensitic stainless steel
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (%): ≤ 0.05
Silicon, Si (%): ≤ 0.50
Manganese, Mn (%): ≤ 0.50
Phosphorus, P (%)≤: 0.030
Sulfur, S (%)≤: 0.015
Chromium, Cr (%): 11.0 ~ 12.5
Nickel, Ni (%): 7.50 ~ 9.50
Molybdneum, Mo (%): ≤ 0.50
Silicon, Si (%): ≤ 0.50
Manganese, Mn (%): ≤ 0.50
Phosphorus, P (%)≤: 0.030
Sulfur, S (%)≤: 0.015
Chromium, Cr (%): 11.0 ~ 12.5
Nickel, Ni (%): 7.50 ~ 9.50
Molybdneum, Mo (%): ≤ 0.50
Niobium, Nb (%): 0.15 ~ 0.50
Copper, Cu (%): 1.50 ~ 2.50
Titanium, Ti (%): 0.90 ~ 1.40
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: AT + Aged + SRA
Tensile strength, σb/MPa: 1585
Yield strength, σ0.2/MPa: 1480
Elongation, δ(%): 8.0
Yield strength, σ0.2/MPa: 1480
Elongation, δ(%): 8.0
Reduction of area, ф ≥ (%): -
Impact strength, Akv ≥/J: -
Hardness via heat treatment /HBW: 480 Max.
METHOD OF MELTING
The alloy is usually produced by BEF - AOD / EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Hardness via heat treatment /HBW: 480 Max.
METHOD OF MELTING
The alloy is usually produced by BEF - AOD / EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
TYPICAL APPLICATIONS
Chemical equipments.
Mechanical parts used in the condition of corrosion resistance.
Bolts and nuts, Pressure vessel parts.
Chemical equipments.
Mechanical parts used in the condition of corrosion resistance.
Bolts and nuts, Pressure vessel parts.
Shaft, forgings and parts for Turnbine.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 550mm
Flat bar / plate (Thickness X Width): 10 ~ 400 X 15 ~ 650mm
Round bar (Diameter): 5.5 ~ 550mm
Flat bar / plate (Thickness X Width): 10 ~ 400 X 15 ~ 650mm
Plate: 0.5 ~ 300 X 12 ~ 600 X Lmm
Length: random length, fixed length or based on the customer's special requirement.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@ccsteels.com.
Length: random length, fixed length or based on the customer's special requirement.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@ccsteels.com.
Hot search:1.4543
Previous page:F48
Last page:X3CrNiCuTiNb12-9
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1