ASTM A565 Gr.S41041
2014-10-13 11:34:39 Origin: Remark:0 Click:
Specifications S41041 Datasheet, ASTM A565 Grade S41041 Chemical, S41041 Properties from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working, Peeled or rough turned machining. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
MATERIAL SPECIFICATION DATA SHEET - UNS S41041
MATERIAL CATEGORY - Martensite type - 13Cr-Nb
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
AVAILABILITY
Round bar / flat bar / strip / hollow bar / forgings
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
Round bar / flat bar / strip / hollow bar / forgings
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
PRODUCT PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 800mm
Plate / Sheet steel / Steel strip: 0.1mm to 200mm
Width: 8mm to 1200mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 800mm
Plate / Sheet steel / Steel strip: 0.1mm to 200mm
Width: 8mm to 1200mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
MATERIAL SPECIFICATIONS - ASTM A959 (2004), A276, A312, A632, A176, A580
CHEMICAL COMPOSITION (WEIGHT %)
C (%): 0.13 ~ 0.18
Si (%): ≤ 0.50
Mn (%): 0.40 ~ 0.60
P (%)≤: 0.030
S (%)≤: 0.030
Cr (%): 11.5 ~ 13.0
Ni (%): ≤ 0.50
Mo (%): ≤ 0.20
N (&): -
Si (%): ≤ 0.50
Mn (%): 0.40 ~ 0.60
P (%)≤: 0.030
S (%)≤: 0.030
Cr (%): 11.5 ~ 13.0
Ni (%): ≤ 0.50
Mo (%): ≤ 0.20
N (&): -
Nb (%): 0.15 ~ 0.45
Al (%): ≤ 0.05
Al (%): ≤ 0.05
MECHANICAL PROPERTIES ( FINAL HEAT TREATMENT Q + T )
Condition of heat treatment: 1136~1163℃ X 2h, oil/air cooling, 677℃ x 2h tempering
Tensile strength, σb/MPa: 795
Yield strength, σ0.2/MPa: 515
Elongation, δ (%): 15.0
Yield strength, σ0.2/MPa: 515
Elongation, δ (%): 15.0
Reduction of area, ψ (%)≥: 50.0
Impact, Akv ≥/J: 27
Hardness | HRB (HRC): ≤ 277
Hardness | HRB (HRC): ≤ 277
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TYPICAL APPLICATIONS
Chemical equipment
Mechanical parts used in the condition of corrosion resistance
Bolt and nut
Pressure vessel
Chemical equipment
Mechanical parts used in the condition of corrosion resistance
Bolt and nut
Pressure vessel
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1