STS 436L
2022-04-14 16:11:59 Origin： Remark：0 Click：
Description STS 436L Steel strip, Sheet On stock STS 436L Inventory, Plate STS 436L Stcoklist Properties - Raw material technical specifications KS D3705 - 2001 / 2006. Melting, ESR & VAR technique, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
RAW MATERIAL SPECIFICATIONS - Grade STS 436L
Technical Specifications - KS D3705 - 2001 / 2006
Official Test Certificate - issued by TUV - SGS - BV
Official Test Certificate - issued by TUV - SGS - BV
HS Code For Customs - 72201100 / 72202030 / 72221100
Material Category - Hot / cold rolled Stainless steel Plate, Strip
Material Category - Hot / cold rolled Stainless steel Plate, Strip
Inventory & Stocklist - THK1.0 ~ 2.5 X Width 1000 ~ 1220 X length
Chemical Composition (Mass Weight - %)
C (％): ≤ 0.025
Si (％): ≤ 1.00
Chemical Composition (Mass Weight - %)
C (％): ≤ 0.025
Si (％): ≤ 1.00
Mn (％): ≤ 1.00
P (％) ≤: 0.040
S (％) ≤: 0.030
Cr (％): 16.0 ~ 19.0
Ni (％): ≤ 0.60
P (％) ≤: 0.040
S (％) ≤: 0.030
Cr (％): 16.0 ~ 19.0
Ni (％): ≤ 0.60
Mo (％): 0.75 ~ 1.50
N (％): 0.025
Ti /Nb (%): 8 x (C+N) ~ 0.80
MECHANICAL PROPERTY UNDER ROOM TEMP.
Condition: annealing, 800 ~ 1050 Deg. C .
Tensile strength, σb/ ≥ MPa: 410
Yield strength, σ0.2/ ≥ MPa: 245
Elongation, δ (％) ≥: 20.0
Reduction of area, ф (％) ≥: -
Hardness under solution anneal ≤ (HBW): 217
Yield strength, σ0.2/ ≥ MPa: 245
Elongation, δ (％) ≥: 20.0
Reduction of area, ф (％) ≥: -
Hardness under solution anneal ≤ (HBW): 217
MELTING PROCESS
The alloy is usually produced by AOD / EAF / VOD, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 450mm
Strip / Plate (Thickness X width X Length): 0.5 ~ 2.5mm X 10 ~ 1000mm X Lmm
Flat bar (Thickness X Width): 4 ~ 300 X 15 ~ 550mm
The alloy is usually produced by AOD / EAF / VOD, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 450mm
Strip / Plate (Thickness X width X Length): 0.5 ~ 2.5mm X 10 ~ 1000mm X Lmm
Flat bar (Thickness X Width): 4 ~ 300 X 15 ~ 550mm
Length: random length, fixed length or based on the customer's special requirement.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@ccsteels.com.
If you meet further on any technical inquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@ccsteels.com.
Previous page：STS 434
Last page：STS 436J1L
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1