X04Cr12
2023-05-11 13:30:15   Origin：   Remark：0 Click：

TECHNICAL DATASHEET - X04Cr12
Official Test Report: issued by TUV - SGS -  BV
Special Melting Practice - BEF + AOD / + ESR
HS Code For Customs - 72221100 / 72221900 / 72222000
Material Specifications - IS 1570-5 (1985 / 2004)

CHEMICAL COMPOSITIONS (mass weight - %) 
Carbon, C (％): ≤ 0.08
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 11.5 ~ 13.5
Nickel, Ni (％): -
Molybdenum, Mo (％):  -

MECHANICAL PROPERTY AT ROOM TEMP.
Forms: Round bar, flat bar, forgings and plate
Tensile strength, Rm ≥ MPa:  415
Yield strength, Rp0.2 / MPa:  205
Elongation, A5 ≥ (％):  22.0
Reduction of area, Z ≥ (％):  -
Hardness via heat treatment / HBW: 187 max.

PRODUCT DESCRIPTION
The alloy is usually produced by EAF AOD / VOD followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered + SRA.

AVAILABLE PROFILE & DIMENSIONS
Round bar / disc / rod (diameter): 5.5mm to 850mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy / middle plate via hot rolled: T60 - 400mm X W70 - 1500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.

TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.