X20Cr13
2023-05-15 08:30:43   Origin：   Remark：0 Click：

MATERIAL TECHNICAL DATASHEET - Grade X20Cr13
Official Test Report: issued by TUV - SGS -  BV
Special Melting Practice - BEF + AOD / + ESR
HS Code For Customs - 72221100 / 72221900 / 72222000
Inventory on hand - Round bar Diam. 5.5 ~ 400mm
Material Specifications - IS 1570-5 (1985 / 2004)
MAIN CHEMICAL ELEMENTS (mass weight %) 
Carbon, C (％):  0.16 ~ 0.25
Silicon, Si (％):  ≤ 1.00
Manganese, Mn (％):  ≤ 1.00
Phosphorus, P (％) ≤:  0.040
Sulfur, S (％) ≤:  0.030
Chromium, Cr (％):  12.0 ~ 14.0
Nickel, Ni (％):  ≤ 1.00
Molybdenum, Mo (％):   -
MECHANICAL PROPERTY UNDER ROOM TEMP.
Forms: Round bar, flat bar, forgings and plate
Tensile strength, σb/≥ MPa:  640
Yield strength, σ0.2/MPa:  440
Elongation, δ ≥(％):  22.0
Reduction of area, ф ≥ (％):  -
Hardness via heat treatment /HBW:  241 max.
PRODUCT DESCRIPTION
The alloy is usually produced by EAF AOD / VOD followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered + Stress relief annealing.
AVAILABLE PROFILE & DIMENSIONS
Round bar / Disc (Diameter): 5.5mm to 1000mm
Square bar / Flat bar: 10mm to 600mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy / middle plate via hot rolled: T60 - 400mm X W70 - 1500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1500mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.