AMS 5510
2024-09-23 20:54:51 Origin： Remark：0 Click：
Material Specification Heat Resistant & Austenitic Steel AMS 5510 Round bar, Flat bar, Plate, Forgings Stock Available AMS 5510 Heat treatment
TECHNICIAL DATA SHEET - AMS 5510
Stock available - Round bar Diam. 5 ~ 210mm, Plate, Sheet
Material Category - 18Cr-11Ni-Ti austenitic stainless
Material Specifications - AMS 5510D
Special Melting Process - EAF + VD + LF / EF + AOD / + ESR
H S Code For Customs: 7222 2000 / 72221100
H S Code For Customs: 7222 2000 / 72221100
TYPICAL CHEMICAL COMPOSITIONS (mass fraction - %)
Carbon, C (％): ≤ 0.08
Manganese, Mn (％): ≤ 2.00
Silicon, Si (％): 0.25 ~ 1.00
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 17.0 ~ 19.0
Silicon, Si (％): 0.25 ~ 1.00
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 17.0 ~ 19.0
Nickel, Ni (%): 9.00 ~ 12.0
Titanium, Ti (%): 5C ~ 0.70
Nitrogen, N (%): ≤ 0.10
Molydenum, Mo (%): ≤ 0.75
Copper, Cu (%): ≤ 0.75
TYPICAL MECHANICAL PROPERTIES
Tensile strength, Rm ≥ MPa: 515
Yield strength, Ro0.2 / MPa: 205
Elongation, A5 ≥ (％): 40.0
Reduction of area, Z ≥ (％): -
Hardness via heat treatment /HBW: 269 Max.
Reduction of area, Z ≥ (％): -
Hardness via heat treatment /HBW: 269 Max.
TYPICAL APPLICATIONS
Chemical equipments, Bolts and nuts
Mechanical parts used in the condition of corrosion resistance
Pressure vessel.
PROFILE AND DIMENSIONS
Round bar / rod / disc (diameter): 5.5 ~ 850mm
Square bar / Flat bar: 6 ~ 600mm
Round bar / rod / disc (diameter): 5.5 ~ 850mm
Square bar / Flat bar: 6 ~ 600mm
Wire rod (diameter): 1.0 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form).
Forging piece: Different shapes based on OEM.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form).
Forging piece: Different shapes based on OEM.
Other sizes can be supplied to meet specific requirements.
Hot search：
Previous page：1.4938 / X12CrNiMoV12 / S64152 / M-152
Last page：30CrMoA
