SAE 51430
2024-09-29 11:15:11 Origin： Remark：0 Click：
SAE 51430 Ferritic Steel Corrosion Resistant, Bar, Sheet, Strip, and plate 17Cr (AMS 5503), ESR ingot, Annealed, Cold drawn
MATERIAL DESIGNATION - SAE 51430
Stock available: Bar, Plate, Sheet, Strip
Material Category: 17Cr Ferritic type stainless
Material Specifications: AMS 5503
Special Melting Process - EAF + VD + LF / EF + AOD / + ESR
H S Code For Customs: 7220 2030 / 7220 1200 / 7220.1100
H S Code For Customs: 7220 2030 / 7220 1200 / 7220.1100
TYPICAL CHEMICAL COMPOSITIONS (mass fraction - %)
Carbon, C (％): ≤ 0.12
Manganese, Mn (％): ≤ 1.00
Silicon, Si (％): ≤ 1.00
Carbon, C (％): ≤ 0.12
Manganese, Mn (％): ≤ 1.00
Silicon, Si (％): ≤ 1.00
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 16.0 ~ 18.0
Nickel, Ni (%): ≤ 0.75
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 16.0 ~ 18.0
Nickel, Ni (%): ≤ 0.75
Molydenum, Mo (%): ≤ 0.50
Copper, Cu (%): ≤ 0.50
Copper, Cu (%): ≤ 0.50
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Conditon: cold rolled, annealed.
Tensile strength, Rm ≥ MPa: 448
Yield strength, Ro0.2 / MPa: 241
Elongation, A5 ≥ (％): 20.0
Reduction of area, Z ≥ (％): -
Hardness via heat treatment / HRB: 90 max.
Reduction of area, Z ≥ (％): -
Hardness via heat treatment / HRB: 90 max.
PRODUCT DESCRIPTION
The material is usually produced by AOD / VOD / EF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the softened condition.
Final heat treatment - solution treatment.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers.
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers.
Hot search：
Previous page：GJB 12CrNi2A
Last page：AMS 5743
