AMS 5506
2024-11-11 09:29:00 Origin： Remark：0 Click：
AMS 5506 Martensitic Steel, Corrosion and Heat resistant, Sheet, Strip, and plate 13Cr (SAE 51420 Annealed, Cold Rolled
MATERIAL DESIGNATION - AMS 5506
Stock available: Plate, Sheet, Strip
Material Category: 13Cr Martensitc type stainless
Material Specifications: AMS 5506E
H S Code For Customs: 7220 2030 / 7220 1200 / 7220.1100
Special Melting Process: - EAF + VD + LF
- EF + ESR
- EAF + AOD + LF
- EAF + AOD + ESR
- VIM + ESR / VAR
PRODUCT DESCRIPTION
AMS 5506 is usually produced by EAF + AOD followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright condition.
Final heat treatment - heated to 996°C+6, held at heatfor 25 minutes +2, and cooled in air.
Stock available: Plate, Sheet, Strip
Material Category: 13Cr Martensitc type stainless
Material Specifications: AMS 5506E
H S Code For Customs: 7220 2030 / 7220 1200 / 7220.1100
Special Melting Process: - EAF + VD + LF
- EF + ESR
- EAF + AOD + LF
- EAF + AOD + ESR
- VIM + ESR / VAR
PRODUCT DESCRIPTION
AMS 5506 is usually produced by EAF + AOD followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright condition.
Final heat treatment - heated to 996°C+6, held at heatfor 25 minutes +2, and cooled in air.
TYPICAL CHEMICAL COMPOSITIONS (mass weight - %)
Carbon, C (％): 0.30 ~ 0.40
Manganese, Mn (％): ≤ 1.00
Silicon, Si (％): ≤1.00
Phosphorus, P (％) ≤: 0.035
Sulfur, S (％) ≤: 0.020
Chromium, Cr (％): 12.00 ~ 14.00
Nickel, Ni (%): ≤ 0.50
Molydenum, Mo (%): ≤ 0.50
Copper, Cu (%): ≤ 0.50
Aluminum, Al (%): ≤ 0.15
Carbon, C (％): 0.30 ~ 0.40
Manganese, Mn (％): ≤ 1.00
Silicon, Si (％): ≤1.00
Phosphorus, P (％) ≤: 0.035
Sulfur, S (％) ≤: 0.020
Chromium, Cr (％): 12.00 ~ 14.00
Nickel, Ni (%): ≤ 0.50
Molydenum, Mo (%): ≤ 0.50
Copper, Cu (%): ≤ 0.50
Aluminum, Al (%): ≤ 0.15
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Conditon: hot or cold rolled, annealed.
Tensile strength, Rm ≥ MPa: 689 max.
Yield strength, Ro0.2 / MPa: -
Elongation, A5 ≥ (％): 12.0
Reduction of area, Z ≥ (％): -
Hardness via heat treatment / HRC: 39 ~ 46.
Reduction of area, Z ≥ (％): -
Hardness via heat treatment / HRC: 39 ~ 46.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers.
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers.
Hot search：
Previous page：EN 10302 type 1.4938
Last page：Cr4W2MoV
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1