AISI 504
2014-10-28 09:23:05 Origin: Remark:0 Click:
ASTM A959 Technical specification of AISI 504 is 9.0% Chromium Base martensitic steel, AISI 504 Round bar, flat bar, and forgings, rolling, heat treatment, cold working.
RAW MATERIAL TECHNICAL DATA SHEET - Grade AISI 504 & UNS S50400
MATERIAL CATEGORY: Martensite type 9Cr-1Mo
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
The alloy is usually produced by AOD / VOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
MATERIAL SPECIFICATIONS - ASTM A959 (2004), A276, A312, A632, A176, A580
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (%): ≤ 0.15
Silicon, Si (%): ≤ 1.00
Manganese, Mn (%): ≤ 1.00
Phosphorus, P (%)≤: 0.040
Sulfur, S (%)≤: 0.040
Chromium, Cr (%): 8.00 ~ 10.0
Nickel, Ni (%): -
Molybdenum, Mo (%): 0.90 ~ 1.10
Silicon, Si (%): ≤ 1.00
Manganese, Mn (%): ≤ 1.00
Phosphorus, P (%)≤: 0.040
Sulfur, S (%)≤: 0.040
Chromium, Cr (%): 8.00 ~ 10.0
Nickel, Ni (%): -
Molybdenum, Mo (%): 0.90 ~ 1.10
MECHANICAL PROPERTIES FINAL HEAT TREATMENT
Condition of heat treatment: QT
Tensile strength, σb/MPa: 680
Yield strength, σ0.2/MPa: 575
Elongation, δ (%): 13
Reduction of area, ф(%): -
Hardness | HRB: 197
Reduction of area, ф(%): -
Hardness | HRB: 197
TYPICAL APPLICATIONS
Chemical equipment & parts.
Mechanical parts used in the condition of corrosion resistance
Bolt and nuts, Pressure vessel.
Mechanical parts used in the condition of corrosion resistance
Bolt and nuts, Pressure vessel.
PRODUCT PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 10mm to 600mm
Plate / Sheet steel / Steel strip: 0.1mm to 1200mm
Width: 8mm to 1500mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts, other different shapes based on OEM.
Square bar / Flat bar: 10mm to 600mm
Plate / Sheet steel / Steel strip: 0.1mm to 1200mm
Width: 8mm to 1500mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. Email: sales@ccsteels.com
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. Email: sales@ccsteels.com
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1