XM-13
2024-10-16 11:02:00 Origin： Remark：0 Click：
Precipitation hardening type 13Cr-8Ni-2Mo-Al Steel XM-13 Round bar, plate, Inventory PH13-8Mo hollow bar steelmaking, hot forging, hot rolling, Heat treatment, cold working
MATERIAL DATA SHEET - PH13-8Mo & XM-13
MATERIAL CATEGORY: Precipitation hardening type 13Cr-8Ni-2Mo-Al
PRODUCT DESCRIPTION
The alloy is usually produced by VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black / bright in the annealed condition.
Final heat treatment - solution treatment / Aged
MATERIAL SPECIFICATIONS - ASTM A959 (2004), A693, A705
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): ≤ 0.05
Silicon, Si (％): ≤ 0.10
Manganese, Mn (％): ≤ 0.20
Phosphorus, P (％)≤: 0.010
Sulfur, S (％)≤: 0.008
Chromium, Cr (％): 12.3 ~ 13.2
Nickel, Ni (％): 7.50 ~ 8.50
Molybdenum, Mo (％): 2.00 ~ 2.50
Aluminum, Al (％): 0.90 ~ 1.35
MATERIAL CATEGORY: Precipitation hardening type 13Cr-8Ni-2Mo-Al
PRODUCT DESCRIPTION
The alloy is usually produced by VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black / bright in the annealed condition.
Final heat treatment - solution treatment / Aged
MATERIAL SPECIFICATIONS - ASTM A959 (2004), A693, A705
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): ≤ 0.05
Silicon, Si (％): ≤ 0.10
Manganese, Mn (％): ≤ 0.20
Phosphorus, P (％)≤: 0.010
Sulfur, S (％)≤: 0.008
Chromium, Cr (％): 12.3 ~ 13.2
Nickel, Ni (％): 7.50 ~ 8.50
Molybdenum, Mo (％): 2.00 ~ 2.50
Aluminum, Al (％): 0.90 ~ 1.35
Others (%), N ≤ 0.01
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: Bar, forge piece
Condition: H950
Tensile strength, σb / MPa: 1510
Yield strength, σ0.2 / MPa: 1420
Elongation, δ5 (％): 10.0
Reduction of area, ψ (％): 45；35
Hardness, HRC: ≥45
Form: Bar, forge piece
Condition: H1000
Tensile strength, σb/MPa: 1410
Yield strength, σ0.2/MPa: 1310
Elongation,, δ (％): 10.0
Reduction of area, ψ (％): 50；40
Hardness, HRC: ≥ 43
Form: Bar, forge piece
Condition: H1025
TS, σb/MPa: 1275
YS, σ0.2/MPa: 1210
EL, δ (％): 11
RA, ψ (％): 50；45
Hardness, HRC: ≥ 41
Form: Bar, forge piece
Condition: H1050
TS, σb/MPa: 1210
YS, σ0.2/MPa: 1140
EL, δ (％): 12
RA, ψ (％): 50；45
Hardness, HRC: ≥ 40
Form: Bar, forge piece
Condition: H1100
TS, σb/MPa: 1030
YS, σ0.2/MPa: 930
EL, δ (％): 14
RA, ψ (％): 50
Hardness, HRC: ≥ 34
TYPICAL APPLICATIONS
Chemical equipments and parts.
Mechanical parts used in the condition of corrosion resistance
Bolt and nuts, Pressure vessel.
PROFILE AND DIMENSIONS
Round bar / rod/ disc (diameter): 5.5mm to 900mm
Square bar / Flat bar: 6mm to 500mm
Plate / Sheet steel / Steel strip: 0.1mm to 200mm
Width: 8mm to 600mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts, other different shapes based on OEM.
ADVANTAGE & SUPERIOR SERVICE
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: Bar, forge piece
Condition: H950
Tensile strength, σb / MPa: 1510
Yield strength, σ0.2 / MPa: 1420
Elongation, δ5 (％): 10.0
Reduction of area, ψ (％): 45；35
Hardness, HRC: ≥45
Form: Bar, forge piece
Condition: H1000
Tensile strength, σb/MPa: 1410
Yield strength, σ0.2/MPa: 1310
Elongation,, δ (％): 10.0
Reduction of area, ψ (％): 50；40
Hardness, HRC: ≥ 43
Form: Bar, forge piece
Condition: H1025
TS, σb/MPa: 1275
YS, σ0.2/MPa: 1210
EL, δ (％): 11
RA, ψ (％): 50；45
Hardness, HRC: ≥ 41
Form: Bar, forge piece
Condition: H1050
TS, σb/MPa: 1210
YS, σ0.2/MPa: 1140
EL, δ (％): 12
RA, ψ (％): 50；45
Hardness, HRC: ≥ 40
Form: Bar, forge piece
Condition: H1100
TS, σb/MPa: 1030
YS, σ0.2/MPa: 930
EL, δ (％): 14
RA, ψ (％): 50
Hardness, HRC: ≥ 34
TYPICAL APPLICATIONS
Chemical equipments and parts.
Mechanical parts used in the condition of corrosion resistance
Bolt and nuts, Pressure vessel.
PROFILE AND DIMENSIONS
Round bar / rod/ disc (diameter): 5.5mm to 900mm
Square bar / Flat bar: 6mm to 500mm
Plate / Sheet steel / Steel strip: 0.1mm to 200mm
Width: 8mm to 600mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts, other different shapes based on OEM.
ADVANTAGE & SUPERIOR SERVICE
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special material is welcome.
CNC saw cutting.
Marking by stamping or printing.
Third party inspection service.
Export packing / Export documents.
Transport by Track, Sea, Courier (FedEx, UPS, DHL) and Air Cargo.
We closely cooperate with the professional inspection partners to strictly control the quality and improve the quality manage system, and guarantee the goods delivery each time. It is proved that we are worth of trusting and will be the strategic partner of the supplying chains in the special steels field.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special material is welcome.
CNC saw cutting.
Marking by stamping or printing.
Third party inspection service.
Export packing / Export documents.
Transport by Track, Sea, Courier (FedEx, UPS, DHL) and Air Cargo.
We closely cooperate with the professional inspection partners to strictly control the quality and improve the quality manage system, and guarantee the goods delivery each time. It is proved that we are worth of trusting and will be the strategic partner of the supplying chains in the special steels field.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email:sales@ccsteels.com
Hot search：XM-13
Previous page：UNS S50400
Last page：S13800
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1